TP-Link MC112CS MC100CM User Guide. - Page 18
Installation Procedure
 |
UPC - 845973030421
View all TP-Link MC112CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3.1 Installation Procedure Use a fiber cable to connect two converters, or connect a converter with a 100Base-FX Device. 1. Connection of a Converter and a 10/100Base-TX Device (HUB or Switch). • Make sure that the length of the Cat.5 twisted pair cable between the 10/100Base-TX device and the converter is less than 100 meters. • Connect one end of the Cat.5 twisted pair cable to the RJ45 jack on the converter and the other end of the cable to the RJ45 jack on the 10/100Base-TX device. 2. Connection of two Converters or a Converter and a 100Base-FX Device. • Use a SC fiber cable to connect the two Converters' SC connector or the SC connecter of a Converter and a 100Base-FX Device. 3. Turn on the power. 12
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
 |
 |
12
3.1 Installation Procedure
Use a fiber cable to connect two converters, or connect a converter
with a 100Base-FX Device.
1.
Connection of a Converter and a 10/100Base-TX Device (HUB or
Switch).
•
Make sure that the length of the Cat.5 twisted pair cable
between the 10/100Base-TX device and the converter is less
than 100 meters.
•
Connect one end of the Cat.5 twisted pair cable to the RJ45
jack on the converter and the other end of the cable to the
RJ45 jack on the 10/100Base-TX device.
2.
Connection of two Converters or a Converter and a 100Base-FX
Device.
•
Use a SC fiber cable to connect the two Converters’ SC
connector or the SC connecter of a Converter and a
100Base-FX Device.
3.
Turn on the power.