TP-Link MC230L MC230LUS V1 Installation Guide - Page 2

Specifications General Specifications Standards LED Connector Power Dimensions IEEE 802.3z PWR, Link 2 SFP External Power Adapter: 5 V/0.6 A 94.5x73x27 mm Environmental and Physical Specifications Operating Temperature Storage Temperature Operating Humidity Storage Humidity 0˚C to 50˚C (32˚F to 122˚F) -40˚C to 70˚C (-40˚F to 158˚F) 10% to 90% RH non-condensing 5% to 90% RH non-condensing To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community. For technical support and other information, please visit https://www.tp-link.com/support, or simply scan the QR code. If you have any suggestions or needs on the product guides, welcome to email [email protected]. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended. Adapter shall be installed near the equipment and shall be easily accessible. Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us. The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.