TP-Link T1600G-28PS T1600G-18TSUN V2 Installation Guide - Page 7
For T1500-28TC TL-SL2428 / T1600G-18TS TL-SG2216 / T1600G-28TS / T1600G-52TS TG, SG2452 / T1700G-
View all TP-Link T1600G-28PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
JetStream Smart Switch The front panel of The T1600G-52PS (TL-SG2452P) is shown as the following figure. Figure 1-8 Front Panel of T1600G-52PS (TL-SG2452P) Reset LED Mode Switch Button LEDs 10/100/1000Mbps RJ45 Port The front panel of The T1700G-28TQ is shown as the following figure. Figure 1-9 Front Panel of T1700G-28TQ SFP Port LEDs Unit ID LED Reset 10/100/1000Mbps RJ45 Port SFP+ Port The front panel of The T1700X-16TS is shown as the following figure. Figure 1-10 Front Panel of T1700X-16TS LEDs LEDs Indication LEDs Reset 100M/1000M/10Gbps RJ45 Port 1G/10Gbps SFP+ Port For T1500-28TC (TL-SL2428) / T1600G-18TS (TL-SG2216) / T1600G-28TS / T1600G-52TS (TGSG2452) / T1700G-28TQ / T1700X-16TS LED PWR SYS 10/100M Link/Act Indication On: The switch is powered on. Off: The switch is powered off or power supply is abnormal. Flashing: Power supply is abnormal. Flashing: The switch works properly. On or Off: The switch works improperly. On: A device is connected to the corresponding port but no activity. Flashing: Data is being transmitted or received. Off: No device is connected to the corresponding port. Note: 10/100M for T1500-28TC. Link/Act for T1600G-18TS (TL-SG2216), T1600G28TS, T1700G-28TQ. 1000Mbps On: Running at 1000Mbps. Off: Running at 10/100Mbps or no device is linked to the corresponding port. Note: For T1600G-18TS (TL-SG2216), T1600G-28TS, T1700G-28TQ. Introduction 03