TP-Link TD-W8961N TD-W8961N V1 User Guide 1910010964

TP-Link TD-W8961N Manual

Get TP-Link TD-W8961N PDF manuals and user guides View all TP-Link TD-W8961N manuals
Add to My Manuals
Save this manual to your list of manuals

TP-Link TD-W8961N manual content summary:

  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 1
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router Rev: 1.0.0 1910010964
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 2
    COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 3
    . This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 4
    CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 5
    power source.  Don't disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us.  Avoid water and wet locations. This product can be used in the following countries: AT BG BY CA CZ DE DK EE
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 6
    DECLARATION OF CONFORMITY For the following equipment: Product Description: 300Mbps Wireless N ADSL2+ Modem Router Model No.: TD-W8961N Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 7
    Guide 9 TCP/IP Configuration 9 Login 10 Chapter 4 4.1 4.2 4.3 4.4 4.5 Software Configuration 13 Status 13 4.1.1 Device Info 13 4.1.2 System Log 14 4.1.3 Statistics 15 Quick Start 17 Interface Setup 18 4.3.1 Internet ...18 4.3.2 LAN ...22 4.3.3 Wireless 26 Advanced Setup
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 8
    SNMP ...56 4.5.4 UPnP ...56 4.5.5 DDNS ...57 4.5.6 CWMP ...57 4.6 Maintenance 58 4.6.1 Administration 59 4.6.2 Time Zone 59 4.6.3 Firmware 61 4.6.4 SysRestart 63 4.6.5 Diagnostics 63 4.7 Help...64 Appendix A: Specifications 66 Appendix B: Troubleshooting 67 Appendix C: Technical Support 70
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 9
    Package Contents The following contents should be found in your package:  One TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router  One Power Adapter for TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router  Quick Installation Guide  One RJ45 cable  Two RJ11 cables  One ADSL splitter  One Resource CD
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 10
    Router User Guide Chapter 1 Introduction Thank you for choosing the TD-W8961N 300Mbps Wireless . The TD-W8961N connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL Ethernet using any web browser. ADSL The TD-W8961N supports full-rate ADSL2+ connectivity conforming to
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 11
    Supports firmware upgrade and Web management.  Provides WPA-PSK/WPA2-PSK data security, TKIP/AES encryption security.  Provides 64/128-bit WEP encryption security and wireless LAN ACL (Access Control List). 1.3 Conventions The modem router or device mentioned in this User Guide stands for TD-W8961N
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 12
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 2 Hardware Installation 2.1 The Front Panel Figure 2-1 The the modem router is operating in Bridge mode. Please refer to Note 2 for troubleshooting. Wireless is enabled but no data is being transmitted. The modem router is sending
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 13
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide (LAN1-4) On Flash enabled. Please refer to 4.3.3.1 WPS Settings for more information. There is a device connected to this LAN port. The modem router is sending or receiving data over this LAN port if your Internet service is available now
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 14
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide 2.2 The powered on, use a pin to press and hold the Reset button for at least 5 seconds. And the modem router will the WiFi function.  1, 2, 3, 4 (LAN): Through the port, you can connect the modem router to your PC or the other Ethernet
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 15
    problem, please contact your ISP. Before cable connection, cut off the power supply and keep your hands dry. You can follow the steps below to install it. Step 1: Connect the ADSL Line. Method one: Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear panel of TD-W8961N
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 16
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Method two：You can use a separate splitter. External splitter can divide the data and voice, and then you can access the Internet and make calls at the same time. The external splitter has three ports: • LINE: Connect to the wall jack •
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 17
    IP address of the TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router is 192.168.1.1. And the default Subnet Mask is 255.255.255.0. These values can be changed as you desire. In this guide, we use all the default values for description. Connect the local PC to the LAN/WAN port of the Router
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 18
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-2 You can check it following the steps below: 1) Is the connection between your PC and the router correct? The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. 2) Is the TCP/IP
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 19
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Step 1: Select the Quick Start tab, then click RUN WIZARD, and you will see the next screen. Click the NEXT button. Figure 3-4 Step 2: Configure the
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 20
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-7 Step 5: Configure the rules for the WLAN, and click NEXT. Figure 3-8  Note: If the Access Point is activated, the wireless function will be available
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 21
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 4 Software Configuration This User Guide recommends using the "Quick Installation Guide" for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 22
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-2  Note: Click the other submenus System Log or Statistics in Figure 4-2, and you will be able to view the system log and traffic statistics
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 23
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-3 The modem router can keep logs of all traffic. You can query the logs to find what happened to the modem router. Click the
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 24
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-4  Interface: You can select Ethernet, ADSL and WLAN to view the corresponding network traffic over different ports.  Select Ethernet, and you will see the statistics table as below. Statistics Table: Transmit Frames Transmit
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 25
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Select ADSL, and you will see the statistics table as below. Statistics Table: Transmit Statistics Transmit total PDUs Transmit total Error Counts The total PDUs transmitted over the ADSL port Quick Start Please refer to 3.2 Login. 17
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 26
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.3 Interface Setup Choose "Interface Setup", you can see the next submenus: Figure 4-5 Click any of them, and you will be able to configure the corresponding function. 4.3.1 Internet Choose "Interface Setup→Internet" menu, you can
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 27
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Status: If you want to use a designed VC known protocols). Please input the value provided by your ISP.  QoS: Select the Quality of Service types for this Virtual Circuit, including CBR (Constant Bit Rate), UBR (Unspecified Bit Rate) and
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 28
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide RIP2 format, layer protocol used to establish membership in a multicast group. The ADSL ATU-R supports IGMP version 1 (IGMP v1), IGMP v2 and IGMP v3. Select " services. Select Dynamic PPPoE to obtain an IP address automatically for your 20
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 29
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide PPPoE connection. Select Static PPPoE to use a static Connection: For PPPoA/PPPoE connection, you can select Always on or Connect on-Demand or Connect Manually. Connect on demand is dependent on the traffic. If there is no traffic (or Idle)
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 30
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Static/Dynamic IP Address: For PPPoA/PPPoE connection, , please click SAVE to make the settings take effect. 4.3.2 LAN Choose "Interface Setup→LAN" menu, and you will see the LAN screen (shown in Figure 4-11). Please configure the
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 31
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-11  Router Local IP: These are the IP settings of the LAN interface for the device. These settings may be referred to as Private
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 32
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide means the ADSL modem router will only Protocol) is a session-layer protocol used to establish membership in a multicast group. The ADSL ATU-R supports both IGMP version 1 (IGMP v1), IGMP version 2 (IGMP v2) and IGMP version 1(IGMP v3).
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 33
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Physical Ports: If a physical port is unchecked, the client connected to that port will not be able to obtain IP address automatically although the DHCP function is enabled. All the ports you can setup DNS server PCs will forward to the
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 34
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-13  DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN side.  Note: If you select Disabled, the DHCP function will not take effect. 4.3.3 Wireless Choose "Interface Setup→Wireless" menu, and you will see
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 35
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-14 27
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 36
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Access point Settings: These are the settings of be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.  Transmit Power: Here you can specify the transmit
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 37
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Extension Channel: If "20/40 MHz" is selected, to broadcast the modem router's SSID, select "No".  Use WPS: Use WPS (Wi-Fi Protected Setup) function, you can add a new wireless device to an existing network quickly. To Use WPS, keep the
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 38
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-16 2) WEP-128Bits To configure WEP-128Bits settings, select the WEP-128Bits option from the drop-down list. The menu will change to offer
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 39
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-18  Encryption: Select the encryption you want to use: TKIP/AES, TKIP or AES (AES is an encryption method stronger than TKIP).  TKIP (Temporal
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 40
    a new wireless device to an existing network quickly. This section will guide you how to use WPS function.  WPS state: Display the current WPS state.  WPS mode: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless adapter and modem
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 41
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds. Step 3: Wait for a while until the next screen appears. Click Finish
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 42
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide The WPS Configuration Screen of Wireless Adapter Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration. The WPS
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 43
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-22 Method One: Enter the PIN into my modem router Step 1: For the configuration of the wireless adapter, please choose "Enter a PIN into my
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 44
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-23 Method Two: Enter the PIN from my modem router Step 1: Get the Current PIN code of the modem router from AP self PIN
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 45
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  SSID: Wireless network name shared among all points in . Carefully consider and evaluate any changes to these wireless settings. 4.4 Advanced Setup Choose "Advanced Setup", you can see the next submenus: Figure 4-24 Click any of them
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 46
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-25  Firewall: Select this option can automatically detect and block Denial of Service (DoS) attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack.  SPI: If you enable SPI, all traffics initiated from WAN would be
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 47
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Gateway IP Address: Enter the IP address of the gateway. The gateway is an immediate neighbor of your ADSL modem router that will forward that approximates the cost for this link. The number need not to that you plan to setup for the NAT
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 48
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.3.1 DMZ Choose "Advanced Setup→NAT→DMZ" in Figure 4-28, you can configure the DMZ host in the next screen. A DMZ (demilitarized zone) is a host between a private local network and
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 49
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide example, if you want to set the FTP Virtual server, you can set the start and end port service that you want, please configure the Port number, IP Address and Protocol manually Advanced Setup→NAT→IP Address Mapping(for Multiple IP Service)".
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 50
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Local Start cancel the configuration which is made just now. 4.4.4 QoS Choose "Advanced Setup→QoS", you can configure the QoS in the next screen. QoS helps to prioritize service of selected network traffic over various technologies. 42
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 51
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-32  QoS: Select this option to Activate/ that the rule aimed at.  Physical Ports: Select the port whose traffic flow are controlled by the rule.  Destination MAC & IP & Mask & Port Range: Enter the IP information about the
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 52
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Source MAC & IP & Mask & Port Range: Enter the IP information about the Source host for the rule.  Protocol ID: Select one among TCP/UDP, TCP, UDP or ICMP protocols for
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 53
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-33 1) Assign VLAN PVID for each Interface Click Assign VLAN PVID for each Interface in Figure 4-33, you can assign the PVID for each interface in the next screen (shown in Figure 4-34). Figure 4-34  PVID: Each physical port has a
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 54
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-35  VLAN Index: Setup→ADSL", you can select the ADSL Type and ADSL Mode in the next screen. The ADSL feature can be selected when you meet the physical connection problem. Please check the proper settings with your Internet service
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 55
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-36  ADSL Mode: Select the ADSL operation mode which your ADSL connection uses.  ADSL Type: Select the ADSL operation type which your ADSL connection
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 56
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-38  ACL: If Activated, the IP addresses which are contained in the Access Control List can access to the modem router. If Deactivated, all
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 57
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-39  Filter Type Selection: Select the Note: If select PVC0~PVC7 as an interface, the filter will match the IP traffic of WAN port with specified IPs (Source IP Address and Destination IP Address). If select LAN as an interface,
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 58
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Note: Incoming means that IP traffic that all ports are controlled by the rule.  Protocol: Select the protocol: TCP, UDP or ICMP for the filter rule.  Rule Unmatched: If the current rule can not match, and you select Forward, the modem
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 59
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Note: If you want to make the rule take effect, please select Yes to active the rule. Step 3: Enter the "Source IP Address", "Destination IP Address", "Subnet Mask" and "Port Number" in the corresponding field. Step 4: Select the Protocol
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 60
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.5.2.2 MAC Filter Select IP/MAC Filter as the address for the rule.  Rule Unmatched: If the current rule can not match, and you select Forward, the modem router will skip the rule and transmit directly. If you select Next, the modem router
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 61
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Select the "MAC" as the Rule Type on the Filter screen (show in Figure 4-40). , Then you can configure the specific rule for the example.
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 62
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-41  Filter Type Selection: Select the Application Filter for the next configuration.  Application Filter: Activate or deactivate the function.  ICQ & MSN & YMSG & Real Audio/
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 63
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-42  Filter Type Selection: Select the URL Filter for the next configuration.  Active: Select "Yes" to make the rule to take effect.  URL Index:
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 64
    4.5.3 SNMP TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Choose "Access Management→SNMP", you can see the SNMP screen. The Simple Network Management Protocol (SNMP) is used for exchanging information between network devices. Figure 4-
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 65
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide  Auto-configured: If you activate the function, then the UPnP network devices can automatically configure network addressing, announce their presence in the network to other UPnP devices and enable exchange of simple product and service
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 66
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-46  CWMP: Select activate the CWMP function.  URL: Enter the website of ACS which is provided by your ISP.  User Name/Password: Enter the User Name and password to login the ACS server.  Path: Enter the path that connects to
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 67
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.6.1 Administration Choose "Maintenance→Administration", you system time is the time used by the device for scheduling services. There are three methods to configure the time. You can manually set the time or connect to a NTP (Network Time
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 68
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-49  Note: The ADSL modem router built-in Synchronize time, you don't need to set any items. Figure 4-50 3) Manually Select Manually as the Synchronize time, you need to set the date and time corresponding to the current time. 60
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 69
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-51 4.6.3 Firmware Choose "Maintenance→Firmware", you can upgrade the firmware of the modem router in the screen (shown in Figure 4-52). Make sure the firmware or romfile you want to use is on the local hard drive of the computer.
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 70
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide 3) The modem router will reboot after the the appointed file (shown in Figure 4-54). TD-W8961N Figure 4-54 To restore the modem router's settings: Step 1: Click the Browse button to locate the update file for the device, or enter the exact
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 71
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.6.4 SysRestart Choose "Maintenance→SysRestart", you can select to restart the device with current settings or restore to factory default settings in the screen (shown in
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 72
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-56 4.7 Help Choose "Help", you can view the help information for configuration of any function. 64
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 73
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-57  Note: Click the tab, and you will be able to get the corresponding information. 65
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 74
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Appendix A: Specifications General ANSI T1.413, ITU HTTP, DHCP, ICMP, NAT Safety & Emission FCC, CE Ports Four 10/100M Auto-Negotiation RJ45 ports（Auto MDI/MDIX) One RJ11 port LEDs Power, ADSL, 1,2,3,4(LAN), Internet, WLAN, WPS
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 75
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Appendix B: Troubleshooting T1. How do I restore my Modem Router's configuration to its factory default settings? With the modem router powered on, press and hold the RESET once again by following the instructions in 3.2 Login. T3. What can
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 76
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide For Windows XP a) Click "Start -> Control Panel -> Network and Internet Connections -> Network Connections". b) Right-click Wireless Network Connection (or Local Area Connection), and then click
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 77
    following the instructions in 3.2 Login. Please feel free to contact our Technical Support if the problem still exists.  Note: For more details about Troubleshooting and Technical Support contact information, please log on to our Technical Support Website: http://www.tp-link.com/en/support 69
  • TP-Link TD-W8961N | TD-W8961N V1 User Guide 1910010964 - Page 78
    TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide Appendix C: Technical Support Technical Support  For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq  To download the latest Firmware, Driver, Utility and User Guide, go to: http://www.tp-link.com/en/support/
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router
Rev: 1.0.0
1910010964