TP-Link TD-W8961N TD-W8961N V1 User Guide 1910010964 - Page 32

TD-W8961N, OUT only, Multicast, IGMP v1, IGMP Snoop, DHCP Server, Enabled, Starting IP Address

Get TP-Link TD-W8961N PDF manuals and user guides View all TP-Link TD-W8961N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

TD-W8961N 300Mbps Wireless N ADSL2+ Modem Router User Guide means the ADSL modem router will only accept but will not send RIP packet. OUT only means the ADSL modem router will only send but will not accept RIP packet.  Multicast: Select IGMP version, or disable the function. IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish membership in a multicast group. The ADSL ATU-R supports both IGMP version 1 (IGMP v1), IGMP version 2 (IGMP v2) and IGMP version 1(IGMP v3). Select "Disabled" to disable it.  IGMP Snoop: Enable the IGMP Snoop function if you need.  DHCP Server: Select Enabled, then you will see the screen below (shown in Figure 4-12). The modem router will work as a DHCP Server; it becomes the default gateway for DHCP client connected to it. DHCP stands for Dynamic Host Control Protocol. The DHCP Server gives out IP addresses when a device is booting up and request an IP address to be logged on to the network. That device must be set as a DHCP client to obtain the IP address automatically. By default, the DHCP Server is enabled. The DHCP address pool contains the range of the IP address that will automatically be assigned to the clients on the network. Figure 4-12  Starting IP Address: Enter the starting IP address for the DHCP server's IP assignment. Because the default IP address for the modem router is 192.168.1.1, the default Start IP Address is 192.168.1.100, and the Start IP Address must be 192.168.1.100 or greater, but smaller than 192.168.1.254.  IP Pool Count: The max user pool size.  Lease Time: The length of time for the IP lease. After the dynamic IP address has expired, the user will be automatically assigned a new dynamic IP address. The default is 259200 seconds. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
24
means the ADSL modem router will only accept but will not send RIP packet.
OUT only
means the ADSL modem router will only send but will not accept RIP packet.
Multicast:
Select IGMP version, or disable the function. IGMP (Internet Group Multicast
Protocol) is a session-layer protocol used to establish membership in a multicast group.
The ADSL ATU-R supports both IGMP version 1 (
IGMP v1
), IGMP version 2 (
IGMP v2)
and
IGMP version 1(
IGMP v3
). Select “Disabled” to disable it.
IGMP Snoop:
Enable the IGMP Snoop function if you need.
DHCP Server:
Select
Enabled
, then you will see the screen below (shown in Figure 4-12).
The modem router will work as a DHCP Server; it becomes the default gateway for DHCP
client connected to it. DHCP stands for Dynamic Host Control Protocol. The DHCP Server
gives out IP addresses when a device is booting up and request an IP address to be logged
on to the network. That device must be set as a DHCP client to obtain the IP address
automatically. By default, the DHCP Server is enabled. The DHCP address pool contains the
range of the IP address that will automatically be assigned to the clients on the network.
Figure 4-12
Starting IP Address:
Enter the starting IP address for the DHCP server's IP assignment.
Because the default IP address for the modem router is 192.168.1.1, the default Start IP
Address is
192.168.1.100
, and the Start IP Address must be 192.168.1.100 or greater,
but smaller than 192.168.1.254.
IP Pool Count:
The max user pool size.
Lease Time:
The length of time for the IP lease. After the dynamic IP address has
expired, the user will be automatically assigned a new dynamic IP address. The default
is
259200
seconds.