TP-Link TD-W9960 TD-W9960EU V1 Quick Installation Guide
TP-Link TD-W9960 Manual
 |
View all TP-Link TD-W9960 manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TD-W9960 manual content summary:
- TP-Link TD-W9960 | TD-W9960EU V1 Quick Installation Guide - Page 1
to the router. SSID (network name) and Wireless Password are on the product label. 3. Launch the Tether app and select TD-W9960. Device Local Device TD-W9960 50-C7-BF-02-EA-DC 4. Follow the steps to connect to the internet and register the TP-Link Cloud service. Now you can enjoy your internet. - TP-Link TD-W9960 | TD-W9960EU V1 Quick Installation Guide - Page 2
modem router to its factory default settings and reconfigure it by following the instructions in this guide. A5. Please contact our Technical Support if the problem persists. Q4. What should I do if I forget my password? For the web management page: A1. If you are using a TP-Link ID to log in, click
-
1 -
2
 |
 |
Quick Installation Guide
TD-W9960
300Mbps Wireless N VDSL/ADSL
Modem Router
1. Connect the Hardware
2. Configure the Modem Router
Phone Cable
Phone Jack
Phone Cable
DSL Splitter
Phone (Optional)
1
Note: If the LED turns solid red, please
refer to FAQ > Q2.
If you don’t need the phone service, just directly connect the modem
router to the phone jack with the provided phone cable, then follow steps
3 and 4 to complete the hardware connection.
Wait about 1 to 2 minutes, then
verity that the LED is slowly flashing
red before continuing.
4
PHONE
LINE
MODEM
SSID (network name) and Wireless Password
are on the product label.
Method 2: Via TP-Link Tether App
1. Download the TP-Link Tether app.
or
2. Connect your smartphone to the router.
3. Launch the Tether app and select TD-W9960.
4. Follow the steps to connect to the internet and register the
TP-Link Cloud service.
Scan to download
Device
Local Device
TD-W9960
50-C7-BF-02-EA-DC
Method 1: Via Web Browser
1. Connect your device to the router using an Ethernet cable or wirelessly.
SSID (network name) and Wireless Password are on the product label.
http://tplinkmodem.net
High
Middle
Low
Let’s Get Started
Confirm Password
New Password
Note: If the login page does not appear, please refer to FAQ > Q1.
2. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a password and get started.
Now you can enjoy your internet.
Now you can enjoy your internet.
3. Follow the step-by-step instructions to set up an internet connection
and register the TP-Link Cloud service.
Before You Start
1. You'll usually need an internet service username and password,
given to you by your internet service provider (ISP) when you first
signed up with them. If you are unsure, please check with your ISP.
2. Find the product label at the bottom of your router. Printed on the
label are your router's default SSID (network name) and wireless
password.
RESET
LAN1
LAN4/WAN
LAN2
LAN3
DSL
WPS
Ethernet Cable
Modem Router
2
Push in to turn on the
modem router.
3
POWER
ON/OFF
WPS
RESET
LAN1
LAN4/WAN
LAN2
LAN3
DSL
Power Adapter
Wireless Password/PIN:XXXXXXXX
SSID: TP-Link_XXXX