TP-Link TD-W9960 TD-W9960EU V1 Quick Installation Guide - Page 1

Quick Installation Guide 300Mbps Wireless N VDSL/ADSL Modem Router TD-W9960 1. Connect the Hardware Phone Jack Power Adapter LINE Phone Cable 1 DSL Splitter PHONE MODEM Phone Cable 3 Push in to turn on the mWPoS dem router. Modem Router POWER ON/OFF RESET WPS LAN1 LAN2 LAN3 POWER ON/OFF RESET LAN1 LAN2 LAN3 LAN4/WAN DSL 2 LAN4 If you don't need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps Phone (Optional) 3 and 4 to complete the hardware connection. 4 Wait about 1 to 2 minutes, then verity that the LED is slowly flashing red before continuing. ADSL Note: If the LED turns solid red, please refer to FAQ > Q2. 2. Configure the Modem Router Before You Start 1. You'll usually need an internet service username and password, given to you by your internet service provider (ISP) when you first signed up with them. If you are unsure, please check with your ISP. 2. Find the product label at the bottom of your router. Printed on the label are your router's default SSID (network name) and wireless password. Wireless Password/PIN:XXXXXXXX SSID: TP-Link_XXXX Method 1: Via Web Browser 1. Connect your device to the router using an Ethernet cable or wirelessly. SSID (network name) and Wireless Password are on the product label. WPS POWER ON/OFF RESET LAN1 LAN2 LAN3 LAN4/WAN DSL Ethernet Cable 2. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1. Create a password and get started. Note: If the login page does not appear, please refer to FAQ > Q1. http://tplinkmodem.net New Password Low Middle High Confirm Password Let's Get Started 3. Follow the step-by-step instructions to set up an internet connection and register the TP-Link Cloud service. Now you can enjoy your internet. Method 2: Via TP-Link Tether App 1. Download the TP-Link Tether app. or Scan to download 2. Connect your smartphone to the router. SSID (network name) and Wireless Password are on the product label. 3. Launch the Tether app and select TD-W9960. Device Local Device TD-W9960 50-C7-BF-02-EA-DC 4. Follow the steps to connect to the internet and register the TP-Link Cloud service. Now you can enjoy your internet.