TP-Link TL-ER604W TL-ER604W V1 User Guide 1910010844 - Page 64
Virtual Server, Advanced, Routing, Static Route, Virtual, Server
View all TP-Link TL-ER604W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
The configured entries are as follows: 2. Then set the corresponding Static Route entry, enter the IP address of the interface connecting the Router and the three layer switch into the Next Hop field. Choose the menu Advanced→Routing→Static Route to load the following page. The Static Route entry is as follows: 3.4.1.4 Virtual Server Virtual server sets up public services in your private network, such as DNS, Email and FTP, and defines a service port. All the service requests to this port will be transmitted to the LAN server appointed by the Router via IP address. Choose the menu Advanced→NAT→Virtual Server to load the following page. -59-
-59-
The configured entries are as follows:
2.
Then set the corresponding Static Route entry, enter the IP address of the interface connecting
the Router and the three layer switch into the Next Hop field.
Choose the menu
Advanced
→
Routing
→
Static Route
to load the following page.
The Static Route entry is as follows:
3.4.1.4
Virtual Server
Virtual server sets up public services in your private network, such as DNS, Email and FTP, and
defines a service port. All the service requests to this port will be transmitted to the LAN server
appointed by the Router via IP address.
Choose the menu
Advanced
→
NAT
→
Virtual
Server
to load the following page.