TP-Link TL-SC3130G User Guide
TP-Link TL-SC3130G Manual
 |
UPC - 845973054014
View all TP-Link TL-SC3130G manuals
Add to My Manuals
Save this manual to your list of manuals |
TP-Link TL-SC3130G manual content summary:
- TP-Link TL-SC3130G | User Guide - Page 1
TL-SC3130G Wireless 2-Way Audio Surveillance Camera REV: 2.0.2 1910010429 - TP-Link TL-SC3130G | User Guide - Page 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced - TP-Link TL-SC3130G | User Guide - Page 3
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is - TP-Link TL-SC3130G | User Guide - Page 4
2.5G Mobile Phone Browser Viewing 9 4.2 Using IP Camera via iPhone ...10 Chapter 5 Configuration of Main Menu 11 5.1 Live View ...11 5.1.1 Snapshot...11 5.1.2 Zoom in / out the image via the monitor window 12 5.1.3 Video play buttons ...12 5.1.4 Audio buttons...13 5.2 Setting ...13 5.3 Client - TP-Link TL-SC3130G | User Guide - Page 5
MPEG4 ...21 6.2.3 MJPEG ...24 6.3 Network ...24 6.3.1 Information...25 6.3.2 PPPoE (Point-to-Point Protocol over Ethernet 27 6.3.3 DDNS (Dynamic DNS) ...29 6.3.4 UPnP (Universal Plug and Play 33 6.3.5 Bonjour ...34 6.3.6 IP Notification...35 6.3.7 Wireless ...36 6.3.8 Messenger...40 6.4 Security - TP-Link TL-SC3130G | User Guide - Page 6
found in your package: ¾ TL-SC3130G Wireless 2-Way Audio Surveillance Camera ¾ Power Adapter ¾ Mounting Bracket with three screws, a Lock Ring, a Brace and a Base Plate ¾ RJ45 Cable ¾ Quick Installation Guide ¾ Resource CD, including: z This User Guide z Application Guide z Other helpful information - TP-Link TL-SC3130G | User Guide - Page 7
't view the record video file, please install Xvid codec while installing Intelligent IP Installer. (For Windows 98, ME or 2000 server, the codec might not work properly. You'll need to download Xvid codec 1.0 from the Internet.) 3. Please always update the latest Windows component. (Net Framework - TP-Link TL-SC3130G | User Guide - Page 8
up when the IP Camera is powered on. Built-in Microphone: The location where the voice from your partner comes out. 2.2 Bottom view Power Connector: The power connector is where you connect the power adapter. Reset: To successfully restore the camera to factory defaults, please keep the device - TP-Link TL-SC3130G | User Guide - Page 9
Launch your web browser, and enter the IP address (the default value is 192.168.1.10) of the IP camera in the Location / Address field of your browser. ) Note: If you only want to view the video without setting page, enter "http:///index2.htm" as your web URL . For example, you can enter "http - TP-Link TL-SC3130G | User Guide - Page 10
as the figure below shown, and enter the IP address (the default value is 192.168.1.10) of the IP camera in the Location / Address field of your browser. ) Note: If you only want to view the video without setting page, enter "http:///index2.htm" as your web URL. For example, you can enter "http - TP-Link TL-SC3130G | User Guide - Page 11
6 - TP-Link TL-SC3130G | User Guide - Page 12
2. Enter the default User name "admin" and password "admin" in the dialog box as shown below. ) Note: The default Name "admin" and Password "admin" are set at the factory for the administrator. You can change them in the Account Menu. (Please check "SETTING → BASIC → Security → Account") 7 - TP-Link TL-SC3130G | User Guide - Page 13
3. The web-based management page will be display on your screen. In the leftmost column of the web-based management page are Setting, Client Setting, and Image Setup. For more details, you can refer to Section 5.2、Section 5.3 and Section 5.4. 8 - TP-Link TL-SC3130G | User Guide - Page 14
Mobile Phone Streaming Viewing For 3G mobile phone viewing, type "rtsp://:/video.3gp " into your 3G Streaming Link. is the Public IP address of your IP camera; is the RTSP port of your IP camera (Default value is 554.) Example: rtsp://100.10.10.1:554/video.3gp ) Note: You can - TP-Link TL-SC3130G | User Guide - Page 15
4.2 Using IP Camera via iPhone You can use TP-LINK Web User Interface via iPhone. Please follow the setting process below. Then you can use TP-LINK Web UI via iPhone. 1. Select Safari function 2. Enter IP address in your web link. 3. Enter name and password. Default values are both admin. Then - TP-Link TL-SC3130G | User Guide - Page 16
Manual are all orange. Please note that they're from our latest firmware, which can be downloaded from our website. Web pages in our previous firmware Zoom, Audio and Video Play. You can see more details as follows. 5.1 Live View 5.1.1 Snapshot You can capture a still image shot by the camera and - TP-Link TL-SC3130G | User Guide - Page 17
5.1.2 Zoom in / out the image via the monitor window z Click to display the digital zoom in window. z Pull the will be showed on the above window. to adjust the digital zoom range, and it z You can use the left click of your mouse to move the the desired detail more clearly. to any where on - TP-Link TL-SC3130G | User Guide - Page 18
5.1.4 Audio buttons Symbols Meaning Speakers turned on Speakers turned off Microphone turned on Microphone turned off ) Note mean the speakers of your computer are turned on to transmit the sounds from the connected IP camera(s) mean you can broadcast to the connected IP camera(s) via the - TP-Link TL-SC3130G | User Guide - Page 19
streaming is unavailable if RTSP mode is On (Please check SETTING → BASIC → Camera → General). 5.3.2 View Size Select the desired display image resolution to 640*480 or 320*240. It is suggested that you go to Client Setting to select a suitable View Size before using the IP camera as shown in the - TP-Link TL-SC3130G | User Guide - Page 20
item appears just after RSTP mode is enabled (selecting SETTING → BASIC → Camera → General) 5.3.4 Video Buffer Turn the Video Buffer function ON / OFF the streaming more smoothly in unsteady network environment, but might cause a little delay in live viewing. 5.4 Image Setup You can use the tool bar - TP-Link TL-SC3130G | User Guide - Page 21
three main attributes of perceived color, which is affected by different wavelength of color. With higher value of hue, color will be much more vivid. 5.4.5 Default After the adjustment of all settings, you can still click Default to make the setting back to the factory default settings. 16 - TP-Link TL-SC3130G | User Guide - Page 22
the submenus including System, Camera, Network, and Security. 6.1 System Click System to display the submenus including Information, Date / Time, and Initialize. 6.1.1 Information The Information page provides the basic information of the product which includes Product Name, Firmware Version and Web - TP-Link TL-SC3130G | User Guide - Page 23
of this IP Camera the same with the monitoring PC. z Manual setting: Select this mode to adjust manually the date and time of this IP Camera. z The NTP server (Network Time Protocol) is the time server which is an Internet standard protocol built on the top of TCP / IP. This assures accurate - TP-Link TL-SC3130G | User Guide - Page 24
to specified location. ¾ Restore Setting: Download the saved setting data of this IP Camera. Click Browse... and select the saved file. Click OK and this IP Camera is adjusted according to the loaded data and then restarted. ¾ Firmware Upgrade: Upgrade the device software. Click Browse... and select - TP-Link TL-SC3130G | User Guide - Page 25
control a streaming video server. RTSP is supports by most of the media clients such as Real Player, QuickTime and VLC...etc. ¾ Image Rotate: You can mirror or flip the display screen. ¾ Night Mode: You can choose Auto / Off. If you choose Auto option, the camera - TP-Link TL-SC3130G | User Guide - Page 26
. The default value is 8554. z Viewer Authentication: If the viewer authentication is On, the users will be requested to type in username and password when viewing through RTSP. ¾ RTP (if RTSP mode is On, please check "SETTING → BASIC→ Camera → General") z Unicast Streaming Video / Audio Port Range - TP-Link TL-SC3130G | User Guide - Page 27
768, 1024, 1280, 1536, and 2048 kbps. ¾ MPEG4 view port (if RTSP mode is Off, please check "Setting →Basic → Camera → General") z Unicast Streaming Video / Audio Port Number: Specify the transmission port number of the video data (the default value is 8090). You can specify an even number from 1024 - TP-Link TL-SC3130G | User Guide - Page 28
Camera → General") z RTSP Port: Specify the transmission port number of RTSP streaming. The default value is 554. ¾ RTP (if RTSP mode is On, please check "SETTING → BASIC → Camera → General") z Unicast Streaming Video / Audio second". ¾ Quality: z Fixed Bitrate: Set the bitrate of MPEG4 image transmission for a line - TP-Link TL-SC3130G | User Guide - Page 29
video data (the default value is 8070). You can specify an even number from 1024 to 65534. If you change the setting of Video / Audio Port Number, the setting of Video / Audio Port Number (SSL) will change automatically. ¾ Image Size: Specify the image size when the network camera transmits. You can - TP-Link TL-SC3130G | User Guide - Page 30
6.3.1 Information The page of Information displays the MAC address of the device. ¾ Obtain an IP address automatically (DHCP): (If a DHCP server is installed on the network) Select this, the IP will be assigned by the DHCP serve. ¾ Obtain DNS server address automatically: Select this to obtain the - TP-Link TL-SC3130G | User Guide - Page 31
IP address: Select this when the fixed IP address is set. z IP address: Enter the IP address of the device. z Subnet mask: Enter the subnet mask. z Default gateway: Enter the default gateway. ¾ Use the following DNS server address: Select this when you set the fixed IP address as the IP address - TP-Link TL-SC3130G | User Guide - Page 32
function at the same time. ¾ IP address: The IP address obtained when the IP camera connecting with network at PPPoE. ¾ User ID: Enter the user ID for authentication necessary for PPPoE connections. Type it up to 64 characters. ¾ Password: Enter the password for authentication necessary for PPPoE - TP-Link TL-SC3130G | User Guide - Page 33
is not configured to report the IP address of the camera, you can reset the camera to its factory default settings by pressing the Reset button. Then the camera can be found by Intelligent IP Installer. The change of settings will not take effect until the camera is rebooted. Please go to "System - TP-Link TL-SC3130G | User Guide - Page 34
what your IP address is. Before using this feature, you need to sign up for DDNS service providers such as www.dyndns.org, or www.no-ip.org. The Dynamic DNS client service provider will give you a password or key. ¾ Server name: Choose the DDNS Server from the list. ¾ User ID: Enter the user ID for - TP-Link TL-SC3130G | User Guide - Page 35
¾ Host name: Enter the host name that is registered to the DDNS server. ) Note: How to apply DDNS username and Host name? You can apply DDNS username and Host name by the following steps: 1. Log in http://www.dyndns.org, click the Create Account. 2. Input all information and follow step by step with - TP-Link TL-SC3130G | User Guide - Page 36
3. Log in with new account and click Account → My Hosts → Add Host Services. 4. Type domain in the Hostname field and select sub-domain. 31 - TP-Link TL-SC3130G | User Guide - Page 37
5. After typing in information, check your DDNS service. 6. Type your DDNS User ID, Password and Host name in Setting → Network → DDNS. After completing setting, reboot IP Camera. 32 - TP-Link TL-SC3130G | User Guide - Page 38
UPnP (Universal Plug and Play) Choose menu "Network→UPnP", you can view the information about UPnP ( discovered by the UPnP service application on the LAN. ¾ HTTP port: Enter the HTTP port number and the default HTTP port is 80. ¾ SSL port: Enter the SSL port number and the default SSL port is 443 - TP-Link TL-SC3130G | User Guide - Page 39
inside user. 6.3.5 Bonjour Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices, and services on IP networks. Bonjour uses industry standard IP protocols to allow devices to automatically discover each other without the need to enter IP addresses or - TP-Link TL-SC3130G | User Guide - Page 40
is set to "On", the camera will automatically send an e-mail notification to tell users its updated network parameters if the network settings about IP address、network connection type 、HTTP port or wireless connection is changed or completed. (Some settings will take effect after rebooting - TP-Link TL-SC3130G | User Guide - Page 41
. ¾ Message: Type the text of the E-mail up to 384 characters. Default value provides network information including IP, Port, MAC, Model, Firmware Version and Web Version. 6.3.7 Wireless Choose Network → Wireless, you can configure the wireless function for the camera in the figure below. 36 - TP-Link TL-SC3130G | User Guide - Page 42
connection. Please follow the setting process below step by step: 1. Connect IP Camera with Ethernet connection. 2. Go to SETTING → BASIC → Network → Wireless, and choose option "On". You will see the wireless setting page. 3. Then click Refresh. All access points (AP) around you will show up - TP-Link TL-SC3130G | User Guide - Page 43
4. Select the AP you wish to connect. 5. Enter password in Passphrase field if you need. If you don't know the setting of the wireless AP, please ask your network administrator. 38 - TP-Link TL-SC3130G | User Guide - Page 44
6. Choose the option of Obtain an IP address automatically (DHCP) or Use the following IP address: ¾ Use the following IP address: Select this when the fixed IP address is set. 39 - TP-Link TL-SC3130G | User Guide - Page 45
the TL-SC3130G and the Router (or the PC), and log into the IP camera with its wireless address. 6.3.8 Messenger (Supports up to Windows Live Messenger version 8089) If the firmware of your IP Camera has been updated to LM.1.6.16.03P5, then the Messenger submenu will be displayed under the Network - TP-Link TL-SC3130G | User Guide - Page 46
password: Type the password again. ¾ Alias: Give an alias for the account of your IP Camera. The figure above takes "TL-SC3130G" for example. ¾ Port range: Enter the port range used. ¾ IP Notification: When this feature is enabled, the IP camera would notify "friends" on MSN about its IP address - TP-Link TL-SC3130G | User Guide - Page 47
should set your IP Camera as the virtual server with port range 20000-21000 on the Modem Router's web-based management page. 1. Click "BASIC->Network->Messenger" to enter the "Messenger" page. Enable Messenger and then set the Login Account, Password, Alias, Port range, IP Notification, Privacy and - TP-Link TL-SC3130G | User Guide - Page 48
automatically when you install IntelligentIPInstallerSetup(TPLink)-1.1.16.09.exe. ▲ You can download the IntelligentIPInstallerSetup(TPLink)-1.1.16.09.exe here: http://www.tp-link.com/download/ipcamera/Intelligent_IP_Installer.rar 3. Log into your MSN account. 4. Add the camera's MSN account as - TP-Link TL-SC3130G | User Guide - Page 49
5. Check its status. Normally it should be online. 6. Click the camera icon and select View a contact's webcam to view the video. 44 - TP-Link TL-SC3130G | User Guide - Page 50
7. Wait for a moment, and you will see the video captured by your IP Camera. 6.4 Security Click Security to display the submenus including Account and HTTPS. 45 - TP-Link TL-SC3130G | User Guide - Page 51
The device default account and password setting is "admin / admin". That means everyone who knows IP address can access the device including all configuration. Therefore, it is necessary to assign a password if the device is intended to be accessed by others. ¾ User name: Set a user name between - TP-Link TL-SC3130G | User Guide - Page 52
using HTTP. Using https: //URL/ with a different default TCP port (443) and an additional encryption / authentication layer between the HTTP and TCP, you can use the IP camera through HTTPS easily by using "https://" instead of "http://". ¾ Create & Install: Create a self-signed certificate - TP-Link TL-SC3130G | User Guide - Page 53
) Note: When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio. When enable HTTPS with RTSP off mode, the IP Camera will protect all setting including video and audio. 48 - TP-Link TL-SC3130G | User Guide - Page 54
sending images to an FTP server. By using FTP client function, you can send the image and video file which has been shot and recorded linked with the built-in motion detection function to FTP server. FTP client setting menu is composed of three items, General, Alarm sending and Periodical sending - TP-Link TL-SC3130G | User Guide - Page 55
the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server. ¾ User name: Type the user name for the FTP server. ¾ Password: Type the password for the FTP server. ¾ Retype password: To confirm the password, type the same characters as you have typed in the - TP-Link TL-SC3130G | User Guide - Page 56
(2 digits), thus 14-digit number is added to the file name. z Sequence number: A consecutive number of 10 digits between 0000000001 and 4294967295 and two fixed digits 00 is added to the Image file name. z Sequence number clear: Click Clear and the suffix of the sequence number returns to 1. ¾ Alarm - TP-Link TL-SC3130G | User Guide - Page 57
) Note: You can set motion detection on motion detection page. (Please go to "Setting → Advance →Motion detection → Setting") For more details, you can check Section 6.5. ¾ Effective period: Set the period when the periodical sending is effective. z Always: The periodical sending is always effective - TP-Link TL-SC3130G | User Guide - Page 58
7.1.3 Periodical sending You can set to send an image file to FTP server periodically by selecting On to send the image file to FTP server linked with setting period. ¾ Remote Path: Type the path to storage location of FTP server which you have authorized. ¾ Image file name: Type the file name - TP-Link TL-SC3130G | User Guide - Page 59
want to send an image via e-mail. By using Mail (SMTP) function, you can send a mail with attached image and video which has been shot linked with the built-in motion detection function. The image file can also be sent periodically. E-Mail (SMTP) setting menu is composed of three items, General - TP-Link TL-SC3130G | User Guide - Page 60
. ) Note: The Setting of General will be the same as the setting of IP Notification (Please check "SETTING → BASIC → Network → IP Notification") ¾ SMTP server name: Type the SMTP server name up to 64 characters, or the IP address of the SMTP server. ¾ SMTP Server Port: You can set port number from - TP-Link TL-SC3130G | User Guide - Page 61
The default value is 25. ¾ Security setting: Check SSL box if the mail server the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account. z User name, Password: Type the user name and Password of the user who - TP-Link TL-SC3130G | User Guide - Page 62
addresses. ¾ Administrator e-mail address: Type the Administrator e-Mail address up to 64 characters. This address send the image and file to SMTP server linked with the alarm detection. ¾ Alarm sending: 10 digits between 0000000001 and 4294967295 and two fixed digits 00 is added to the Image file - TP-Link TL-SC3130G | User Guide - Page 63
¾ Alarm z Motion Detection: Click it for using Motion Detection function as a sensor. You can set motion detection function on the motion detection page. ) Note: You can set motion detection on motion detection page. (Please go to "Setting → Advance → Motion detection → Setting"). For more details, - TP-Link TL-SC3130G | User Guide - Page 64
7.4. 7.2.3 Periodical sending You can set to send an image file by SMTP server periodically by selecting On to send the image file by SMTP server linked with setting period. 59 - TP-Link TL-SC3130G | User Guide - Page 65
¾ Image file name: Type the file name of the image sent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score). ¾ Suffix: Select a suffix to be added to the file name sent by SMTP. z None: The name of the sent file will be the Image file name. z Date & time: The date & time suffix - TP-Link TL-SC3130G | User Guide - Page 66
up for capturing and sending images to an HTTP server. By using HTTP client function, you can send the image file and audio file which has been shot and recorded linked with the built-in motion detection function to HTTP server. HTTP client setting menu is composed of two items, General and - TP-Link TL-SC3130G | User Guide - Page 67
URL, port, User ID, Password, and Proxy Server settings. For example: URL: 192.168.1.7/cgi-bin/operator/ptzset ) Note: 1. The setting of URL should be the same as CGI. 2. The example above is for reference only. For more details, please refer to SDK in the subdirectory of the IP camera product - TP-Link TL-SC3130G | User Guide - Page 68
send the mail with connection to the alarm detection by the built-in motion detection function. Select On to send the image and audio file to HTTP server linked with the alarm detection. Alarm sending: Select On to set to send mail with connection to the alarm detection. ¾ Alarm z Motion detection - TP-Link TL-SC3130G | User Guide - Page 69
parameter of CGI (defined in Setting → Advance → HTTP event → General → URL) is from your target device. For example, move=down. z Message: message up in the form of Message = PTZ down. If your target device didn't support the parameter of message, you can't see the message. So you can just take - TP-Link TL-SC3130G | User Guide - Page 70
) Note: You can set schedule function on Schedule page. (Please go to "Setting → Advance → Schedule → Setting") For more details, you can check Section 7.4. 7.4 Schedule When you click Schedule on the Advance mode menu, the Schedule setting menu appears. This is the same menu as the setting menu - TP-Link TL-SC3130G | User Guide - Page 71
to set for different detecting zones. Each one has Threshold and Sensitivity inputs which you can adjust to specific zone sequentially. Motion Detection function can support FTP, SMTP and HTTP event for capturing and sending images. 66 - TP-Link TL-SC3130G | User Guide - Page 72
the image different. The higher sensitivity it is and the more frequently it scans. The default value is 50 and the value range is 0~100. The larger the value, the The System Log function allows users to review any changes and events happened. The system begins logging automatically after started. - TP-Link TL-SC3130G | User Guide - Page 73
shown in system log. In this case, please send the file "backup" to TP-LINK ( you can save it from Setting > Basic > System > Initialize > Backup setting data) , and also provide the router spec you're using, we will analyze and solve the problem as soon as possible. E-mail : [email protected] 68 - TP-Link TL-SC3130G | User Guide - Page 74
chapter provides tables that help you to optimize your IP camera with your network environment. Base on your network upload environment to choose the best Image-Quality setting. For example, if the network environment is ADSL 256Kb(upload) / 2Mb(download), the most fluent Image-Quality needs to set - TP-Link TL-SC3130G | User Guide - Page 75
320*240 512 15 600 16 160*120 1024 30 950 30 160*120 1024 15 750 16 160*120 512 30 500 30 160*120 512 15 50 16 160*120 128 30 130 30 160*120 128 15 140 16 A.3 MJPEG @ 15fps / kbps Quality Excellent Detailed Good Standard Medium 640*480 4000 2400 1600 1300 900 320 - TP-Link TL-SC3130G | User Guide - Page 76
320*240 Medium 15 350 13 160*120 Medium 5 130 5 160*120 Excellent 15 600 13 160*120 Excellent 5 230 5 160*120 Good 15 300 13 160*120 Good 5 115 5 160*120 Medium 15 170 13 160*120 Medium 5 65 5 APPENDIX b - STORAGE REQUIREMENT TABLE This chapter provides tables - TP-Link TL-SC3130G | User Guide - Page 77
B.3 MPEG4 Storage Requirement GB / channel / day Image-Size Bitrate Setting Frame-Rate Setting 640*480 2048 30 640*480 2048 15 640*480 1536 30 640*480 1536 15 640*480 1024 30 640*480 1024 15 640*480 512 30 640*480 512 15 320*240 1536 30 320*240 1536 15 320*240 1024 - TP-Link TL-SC3130G | User Guide - Page 78
/manual/jsp Q3.If the image is blurry, what can I do? Please adjust the IP Camera's focus by rotating the Lens. Q4. If I forgot the IP address and port of my IP Camera. What should I do? Please download the Intelligent IP Installer Setup from our web site, or run the CD firstly. This software
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
 |
 |
TL-SC3130G
Wireless 2-Way Audio Surveillance Camera
REV: 2.0.2
1910010429