TP-Link TL-WR841N User Guide - Page 13
The Rear Panel, TL-WR841N/TL-WR841ND, ON/OFF, POWER - wireless n
UPC - 845973051242
View all TP-Link TL-WR841N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
TL-WR841N/TL-WR841ND 300Mbps Wireless N Router ) Note: After a device is successfully added to the network by QSS function, the QSS LED will keep on for about 5 minutes and then turn off. 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ¾ ON/OFF: The switch for the power. ¾ POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR841N/TL-WR841ND 300Mbps Wireless N Router. ¾ WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet. ¾ 4,3,2,1 (LAN): These ports (4,3,2,1) connect the Router to the local PC(s). ¾ RESET: There are two ways to reset to the Router's factory defaults: 1) Use the Factory Defaults function on "System Tools → Factory Defaults" page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: With the Router powered on, use a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings. ¾ Wireless antenna: To receive and transmit the wireless data. - 6 -