TRENDnet TEW-224UB Manual - Page 45
Property, Description, Power, Disabled, Enabled, Fragmentation, Threshold, Preamble Type, Short,
View all TRENDnet TEW-224UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Property Description 802.11 Save Power Enable the function to allow the Adapter to go to sleep mode, during which data communication could be interrupted. (Disabled or Enabled) Fragmentation Threshold To fragment MSDU or MMPDU into small sizes of frames for increasing the reliability of frame (The maximum value of 2346 means no fragmentation is needed) transmission. The performance will be decreased as well, thus a noisy environment is recommended. Preamble Type ? Long ? Short ? Auto A preamble is a signal used in wireless environment to synchronize the transmitting timing including Synchronization and Start frame delimiter. (Note: Checking the setting of AP prior to changing the Preamble type is recommended.) If in a "noisy" network environment, the Preamble Type should be set to Long. The Short preamble is intended for applications where minimum overhead and maximum performance is desired. If in a "noisy" network environment, the performance would be decreased. Select Auto for the USB adapter to select the Preamble type automatically depending on the Access Point Preamble type. Rate (Mbps) It shows the current transfer rate. (1, 2, 5.5, or 11Mbps or Auto) RTS Threshold This value should remain at its default setting of 2347. Should you encounter inconsistent data flow, only minor modifications of this value are recommended. - 41 -