TRENDnet TEW-P11G User's Guide - Page 47
TCP/IP Tab
UPC - 710931600568
View all TRENDnet TEW-P11G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
TCP/IP Tab Selecting this tab will allow configuration for the TCP/IP network protocol. The basic options are: • Dynamic IP Address (DHCP) - The IP address is obtained automatically, from a DHCP Server on your network. • Fixed IP Address - You must enter the IP address, Subnet Mask, and Gateway Address. • IP Address - Select an unused IP address from the address range used on your LAN. • Subnet Mask - Use the same values as PCs on your LAN (or on the same LAN segment, if you have a Router). • Gateway - Use the same values as PCs on your LAN (or on the same LAN segment, if you have a Router). The Print Server also supports the Auto-IP function. If the Print Server is set to Dynamic IP Address, but there's no DHCP server found on the network, the Print Server will get an IP from the range of 169.254.1.1 ~ 169.254.254.254 automatically. In this case, even though the Print Server was initialized with an Auto-IP, it will change to DHCP whenever a DHCP server is detected. The TCP session parameters should only be changed if advised to do so by your Network Administrator or Print Server Technical Support. Page 44