Thermador HPCN48NS Design Guide Volume 4 - 2014 - Page 40
Chimney, Drawer, Ventilation
View all Thermador HPCN48NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
VENTILATION CHIMNEY WALL DRAWER HOOD (36") HDDW36FS INSTALLATION OPTIONS Thermador Chimney Wall Hoods may be installed above a Thermador non-professional gas, electric, or induction cooktop to create a convenient cooking center. Refer to the appropriate section for additional specifications. Hood installation height above a cooktop can vary. To obtain the necessary installation height above a Thermador nonprofessional gas, electric, or induction cooktop, consult the appliance's installation manual. Thermador Chimney Wall Hoods must be mounted on a wall. These hoods are designed to be used for vertical discharge. A 600 CFM integrated blower is included. min. 13/4" 263/4"- (44 mm) 421/2" (6791079 mm) 22" (559 mm) 51/4" (133 mm) _ 27/8"_ (73 mm) 17"-255/8" (432-651 mm)› 351/2" (900 mm) measurements in inches and mm BLOWER PRESSURE CURVES HDDW36FS 4.02 3.6 3 22 - Speed 1 - • • Speed 3 - • • Speed 4 04" --- 05' INSTALLATION NOTE: This product ships with two transport brackets to hold the moveable canopy in place during shipping and installation. After installation, be sure to remove the brackets to operate the sliding drawer canopy. •a 2.0 S 1.8 • • \ 16 235 354 472 590 708 Ai Flow Rate {CFM) NOTE: All measurements are made with 3 ft. straight duct, 90° bend and 1 ft. straight duct at exhaust. These are NOT free blowing measurements. 1.800.735.4328 I THERMADOR.COM 171