Thermador VCI248DS Installation Instructions - Page 7
Step 1: PREPARING THE CUTOUT, Preparing the wooden framework, Step 2: PREPARING THE INSTALLATION, - weight
 |
View all Thermador VCI248DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
BEFORE INSTALLATION Step 1: PREPARING THE CUTOUT ❑ The wall must be flat and vertical. ❑ Make sure that the wall is capable of providing a firm hold for mounting screws and plugs. Weight in kg: 24,5. Preparing the wooden framework Step 2: PREPARING THE INSTALLATION There are two mounting methods: Installation in wooden framework or Installation with the mounting brackets provided. - Remove mounting brackets by removing screws Preparing the installation with mounting brackets 4 x 1/4" holes - After removing the mounting brackets, the screws must be inserted again. PAGE 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
PAGE 5
BEFORE INSTALLATION
Step 1: PREPARING THE CUTOUT
❑
The wall must be flat and vertical.
❑
Make sure that the wall is capable of providing a firm
hold for mounting screws and plugs.
Weight in kg: 24,5.
Preparing the wooden framework
Step 2: PREPARING THE INSTALLATION
There are two mounting methods:
Installation in wooden framework
or
Installation with the mounting brackets provided.
–
Remove mounting brackets by removing screws
–
After removing the mounting brackets, the screws must
be inserted again.
Preparing the installation with mounting
brackets
4 x 1/4" holes