Thermador VTR630D Design Guide - Ventilation - Page 44
Installation Options, External Exhaust, Internal Recirculation, Blower Pressure Curves
View all Thermador VTR630D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
VENTILATION - ISLAND HOODS VENTILATION LOW PROFILE ISLAND HOOD WITH BLOWER (42"/48") HPIB42HS / HPIB48HS INSTALLATION OPTIONS Thermador Masterpiece® Series Island Hoods may be installed above a Thermador non-professional gas, electric, or induction cooktop to create a convenient cooking center. Refer to the appropriate section for additional specifications. Hood installation height above a cooktop can vary. To obtain the necessary installation height above a Thermador Cooktop or Range, consult the appliance's installation manual. Thermador Island Hoods are suspended from the ceiling. These hoods are designed to be used for vertical discharge. A 600 CFM blower is included. Thermador duct covers are designed for universal application. In recirculation mode the louvers should be towards the ceiling for exhaust air to escape in the kitchen. In ducted mode, the same duct cover can be turned upside down to hide away the louvers behind the lower duct cover piece. EXTERNAL EXHAUST BLOWER PRESSURE CURVES HPIB42HS HPIB48HS INTERNAL RECIRCULATION NOTE: All measurements are made with 3 ft. straight duct, 90° bend and 1 ft. straight duct at exhaust. These are NOT free blowing measurements. 1.800.735.4328 | THERMADOR.COM 171