Toro 51574 Operation Manual - Page 4
Starting/Stopping/Adjusting, the Air Speed, Using the Nozzles, Using the Blower, Using the Vacuum - used
UPC - 021038515748
View all Toro 51574 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Starting/Stopping/Adjusting the Air Speed G017095 WARNING The blower can throw debris, possibly causing serious personal injury to the operator or bystanders. • Do not blow hard objects such as nails, bolts, or rocks. • Do not operate the blower near bystanders or pets. • Use extra care when cleaning debris from stairs or other tight areas. • Wear safety goggles or other suitable eye protection, long pants, and shoes. Using the Vacuum WARNING The vacuum can throw debris, possibly causing serious personal injury to the operator or bystanders. • Do not operate the vacuum without the bag installed or with the bag zipper open. • Do not vacuum sharp, pointed, or hard objects that could be thrown through the fabric of the bag, such as wires, staples, nails, or rocks. Using the Nozzles Install the power (Ultra and Super models only) and concentrator nozzles into the blower tube to help reach into narrow spaces or to remove matted debris from hard surfaces. On Ultra and Super blowers you can use the power nozzle without the concentrator for more power when blowing. 2 1 3 4 1. Blower tube 2. Power Nozzle (Ultra and Super Blowers only) G017266 3. Concentrator nozzle 4. Cord wrap (Ultra Blower only; refer to Using the Cord Wrap) Using the Blower The blower is intended for residential use only. Use the blower outdoors to move debris as needed. G017098 Important: Vacuum only leaves and soft items. Hard items such as sticks, rocks, acorns, and pine cones will damage the impeller. Important: Do not force the vacuum tube into a pile of debris or hold the tube upright while force feeding debris into the tube. Either action may clog and damage the impeller. If the vacuum starts to vibrate or make abnormal noise, stop it, unplug the cord, and check for the cause. Emptying the Bag 1. Turn off and unplug the vacuum from the power source. 2. Empty any debris from the bag. G017099 4