Toro 51592 Operation Manual - Page 3

Setup Converting from Blower to Vacuum Assembling the Blower Install the blower tube and then the inlet cover onto the blower housing. Important: You must install the blower tube before installing the inlet cover because the inlet cover hooks onto the blower tube. The blower will not run unless the bottom inlet cover is locked in place. The impeller rotates for a few seconds after you turn off the blower and can cut or injure fingers. Do not remove the bottom inlet cover when the motor is running or when the unit is plugged into a power outlet. 1. Remove the inlet cover and the blower tube from the blower housing. Figure 3 2. Install the vacuum tube onto the blower housing. Important: The vacuum will not run unless the vacuum tube is locked in place. 3