Toshiba 20AF41 Owners Manual - Page 26

Using the STABLE SOUND feature When the loud sound is made, the stable sound feature automatically lower the sound. To turn on the STABLE SOUND feature: 1. Press MENU, then press or until the AUDIO menu appears. 2. Press v or w to highlight STABLE SOUND. 3. Press or to highlight ON. CH PICTURE AUDIO SET UP OPTION BASS 32 TREBLE 32 BALANCE 0 BBE ON STABLE SOUND ON OFF SELECT ADJUST To turn off the STABLE SOUND feature: Choose OFF in step 3 above. Auto power off The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or if a station completes its broadcast for the day and stops broadcasting on that channel. This feature, however, does not work in the VIDEO mode. Understanding the Power Return feature If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV on automatically. If the power is going to be off for a long time or you are going to be away from home for a long time, remove the power plug from the wall outlet to prevent the TV from turning on in your absence. Appendix Cleaning and care WARNING: TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified service technicians. To clean the TV screen: 1. Unplug the TV to avoid possible shock hazard. 2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water because water spills into the cabinet can cause damage to the TV. 3. Wipe off any excess moisture with a clean dry cloth. 4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet. Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet. These chemicals can damage the finish of the cabinet. Appendix 3I70401D P22-BACK 24 24 16/08/2001, 15:55