Toshiba 22BL702B Owners Manual - Page 20

Initial Installation Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 13. MPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1. Connect the mains plug and switch the TV to on using the side control switch. If the TV does not switch on, press any numbered or button on the remote control, then the language selection menu will be displayed. This screen will appear the first time that the TV is switched on and each time the TV is reset. 6. Press OK button on the remote control to continue and the following message will be displayed on the screen: 7. Select Yes button by using Left or Right button and press OK button to continue. 8. The Auto tuning screen will appear and the television will start to search for available stations. The progress bar will move along the line. You must allow the television to complete the search. The following OSD will be displayed on the screen and the television will search for the selected broadcasts: 2. By pressing Up or Down button, highlight the language you want to set and press OK button. The following message will be displayed next: Note: You can press MENU button to cancel. • After the available stations are stored, Channel List will be displayed on the screen. If you like the sort channels, according to the LCN, please select Yes and then press OK button (if available). 3. By pressing Left or Right button, select the country you want to set and press Down button to highlight the Search Type option. Use Left or Right to set the desired search type. Available search types are Digital and analog, digital only and analog only. 4. When set, Down buton to select Teletext Language. Use Left or Right button to select desired Teletext Language. 5. Press Down button after setting Teletext Language option. Scan Encrypted will be then highlighted. You can set Scan Encrypted as Yes if you want to scan coded stations. • Press OK button to quit channel list and watch TV. Note: Do not turn off the TV while initializing first time installation. - 19 - 22BL702B_22BL704B_MB62_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10076309_10077187.indd 19 18.05.2012 09:16:19