Toshiba 32CV510 Owner's Manual - English - Page 17
Connecting a digital audio system, Connecting an audio system
View all Toshiba 32CV510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 2: Connecting your TV Connecting a digital audio system The TV's DIGITAL AUDIO OUT terminal outputs a Dolby®* Digital g or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input. You will need: • optical audio cable (Use an optical audio cable that has the larger "TosLink" connector and not the smaller "minioptical" connector.) Dolby Digital decoder or other digital audio system LINE IN LR Optical Audio IN TV upper back panel Note: • Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. • The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. * Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Connecting an audio system This connection allows you to use external speakers with an external analog audio amplifier to adjust the sound level. You will need: • standard audio cables Analog audio amplifier To control the audio: 1 Turn on the TV and the digital audio device. 2 Press Y on the TV's remote control and open the Audio menu. 3 Highlight Audio Setup and press T. LINE IN LR TV upper back panel Audio Digital Audio Selector Audio Settings Audio Setup 4 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device (- "Selecting the optical audio output format" on page 45). Audio Setup Shared Analog Audio HDMI 1 Audio MTS Language Speakers Optical Output Format Dolby Digital Dynamic Range Control Reset HDMI 1 Auto Stereo English On Dolby Digital Compressed Done To control the audio: 1 Turn on the TV and the stereo amplifier. 2 Turn off the TV's built-in speakers (- page 44). Note: To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set to a reasonable listening level. 17