Toshiba 37RV52R Owners Manual - Page 6
TV Size, Hole PatternHxV, Screw Size, CAUTION
View all Toshiba 37RV52R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
6) VESA Mounting Pattern TV Size Hole Pattern(HxV) Screw Size 32" 200x200 mm M6 37" 200x200 mm M6 40" 200x200 mm M6 46" 400x200 mm M8 (unit in mm) Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. 2) Remove the four screws shown in the right diagram. This will allow removal of the pedestal stand. 3) Once you have removed all four screws, holding the pedestal stand in place, remove the pedestal stand from the TV. 32" TV VESA Mounting Pattern 40" TV VESA Mounting Pattern Four screws Hook Sturdy strap (as short as possible) 46" TV VESA Mounting Pattern 37" TV Four screws Hook Sturdy strap (as short as possible) VESA Mounting Pattern Four screws Hook Sturdy strap (as short as possible) CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor. Four screws 6 Hook Sturdy strap (as short as possible)