Toshiba 39L1350U User's Guide for L1350U and L2300U Series TV's - Page 60
Switching between two channels using Channel Return, Channel Number, Dash 100, CH RTN
View all Toshiba 39L1350U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
60 SettingupyourTV Favorites browser If a digital channel is not programmed, either through the automatic channel scan or the Channel add function, see "Auto Tuning" on page 46, you will have to tune the RF channel using the Channel Numbers and the (Dash 100) button on the remote control. Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1 Select the first channel you want to view. 2 Select a second channel using the Channel Number buttons (and the (Dash 100) button if selecting a digital channel). 3 Press the CH RTN button on the remote control. The previous channel will display. Each time you press the CH RTN button, the TV will switch back and forth between the last two channels that were tuned. If you press the CH RTN button from a non-antenna input, the TV will return to the last-viewed input. Switching between two channels using SurfLock™ The SurfLock™ feature temporarily "memorizes" one channel to the CH RTN button, so you can return to that channel quickly from any other channel by pressing the CH RTN button. To memorize a channel to the CH RTN button: 1 Tune the TV to the channel you wish to program into the CH RTN button. 2 Press and hold the CH RTN button for a few seconds until the message "Memorized" appears on the screen. The channel has been programmed to the CH RTN button. 3 You can then change channels repeatedly, and when you press the CH RTN button, the memorized channel will be tuned. The TV will return to the memorized channel one time only. Once you press the CH RTN button and then change channels again, the CH RTN memory will be cleared and the button will function as Channel Return, by switching back and forth between the last two channels that are tuned.This feature also works for external inputs.