Toshiba 65L7300UM User's Guide for Model Series L4300U and L7300U TV - Page 34
Connecting remote IR devices
View all Toshiba 65L7300UM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
34 Connecting Your TV Connecting remote IR devices To control the device(s): Point the TV remote control toward the front of the TV and press the button for the desired function. The signal passes from the remote control through the TV to the device via the IR Blaster cable. For more information, see "Setting the IR Blaster" on page 58. (Sample Illustration) Controlling the device(s) - remote control NOTE The IR pass-through feature does not support all IR controlled devices. Satisfactory quality may not be attainable with certain devices. If you cannot locate the device's infrared sensor: 1 Turn off the device. 2 Starting at the device's lower-left corner, place the end of the device's remote control (with the infrared emitter) so it touches the front of the device. Press the POWER button. (Do not use the TV's remote control for this step.) 3 If the device turns on, the sensor is located where the remote control touched the device. 4 If the device does not turn on, move the remote control slightly to the right and press the POWER button again. 5 Repeat the previous steps if necessary.