Toshiba A600 S2201 User Manual - Page 184
GHz Band Channels Sets Wireless IEEE 802.11 Revision a and, n draft 2.0, Channel ID
UPC - 883974169566
View all Toshiba A600 S2201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Wireless LAN *1 Factory-set default channels *2 The band width and the channel which can be used depends on the installed wireless LAN module. And the approved channels on using are different at each country or region. The channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN module will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required. ■ In a Wireless LAN Access Point, the Wireless LAN module will use the factory-set default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device. ■ For Wireless LAN module installed in wireless clients that operating in a peer-to-peer mode, the card will use the default channel 10. 5 GHz Band Channels Sets (Wireless IEEE 802.11 Revision a and n draft 2.0) Frequency Range Channel ID 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 5150-5850 MHz 5180*1 5200*1 5220*1 5240*1 5260*1 5280*1 5300*1 5320*1 5500*1 5520*1 5540*1 5560*1 5580*1 5600*1 5620*1 5640*1 5660*1 5680*1 5700*1 User's Manual C-3