Toshiba DR400 Owners Manual - Page 44

SATELLITE LINK 5 Press [ENTER]. "To Standby Mode" is highlighted. 6 Press [ENTER] again. Satellite Link Start Mode 12:00 AM XP To Standby Mode In a second, the unit will be turned off automatically as it goes into the satellite link standby mode. To cancel the satellite link function while in the satellite link standby mode: Press [I/y ON/STANDBY] to turn on the unit. To cancel the satellite link function while the satellite link recording is in progress: Press [STOP C] on the front panel of the unit. Note • If the signal of external input breaks up over 5 seconds, satellite link function will be canceled. • If you have not set the clock, "Clock Setting" menu will appear at step 1. Follow to step 3 in "CLOCK SETTING" on page 25. • You cannot set the end time for the satellite link timer recording on this unit. • Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording. • You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 41 for more information. • Press [TIMER PROG.] during the satellite link timer recording to check the satellite link timer recording in progress. • When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below. example 1 example 2 example 3 timer recording satellite link timer recording satellite link timer recording satellite link actual recording The first 2 minutes (at the longest) will be cut off. actual recording actual recording The first 2 minutes (at the longest) will be cut off. 44 EN &&"6%@&/JOEC