Toshiba M500 ST5405 Maintenance Manual - Page 91

2.9 Optical Drive Troubleshooting 2 Troubleshooting Procedures 2.9 Optical Drive Troubleshooting This section describes how to determine if the optical drive (DVD-ROM&CD-R/RW or DVD Super Multi drive) is functioning properly. Perform the steps below starting with Procedure 1 and continue with the other procedures as required. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check The CD-ROM/DVD-ROM test program is stored in the Diagnostics Disk. For the test, prepare test Media. Then insert the Diagnostics Disk in the USB floppy disk drive, turn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics, for more information about the diagnostics test procedures. If any errors occur while executing the CD-ROM/DVD-ROM test, go to Procedure 2. PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 2-49