Toshiba M750 S7242 Portege M750 Series User Guide - Page 73
Directing the display output when you turn on the computer, Sample Image Display options window
UPC - 883974221004
View all Toshiba M750 S7242 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Getting Started Using external display devices 73 Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. NOTE Some modes are only available with the appropriate device attached and turned on. The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 Press Fn and F5 simultaneously. 2 While holding down Fn, press F5 repeatedly until the setting you want takes effect. Briefly pause each time you press the F5 key to allow time for the display to change. This hot key cycles through the settings in the following order (the last two options are available if an external monitor is connected): ❖ Built-in display only ❖ Built-in display and external monitor simultaneously ❖ External monitor only ❖ Dual monitor different image (Sample Image) Display options window 3 Release the Fn key.