Toshiba NB305-SP1055M User Manual - Page 41
If replacing an existing memory module, remove this memory, packaging, without touching its connector.
View all Toshiba NB305-SP1055M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Getting Started 41 Adding memory (optional) 6 Using a small Phillips screwdriver, loosen the captive screw that secures the memory module slot cover. Back of computer (Sample Illustration) Removing the memory module slot cover 7 Remove the memory module slot cover. 8 Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems. 9 If replacing an existing memory module, remove this memory module by performing steps 2-3 of "Removing a memory module" on page 45. 10 Carefully remove the new memory module from its antistatic packaging, without touching its connector.