Toshiba Qosmio X870 PSPLZC-01H007 Users Manual Canada; English - Page 127
Auto-Selected, System LCD Only, ENTER, TOSHIBA System Settings.
View all Toshiba Qosmio X870 PSPLZC-01H007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Qosmio X870/X875 series Display This tab lets you customize your computer's display settings for either the internal display or an external monitor. Power On Display This option allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available as part of the Windows Desktop properties. Choose the following settings using the drop-down menu. Auto-Selected Selects an external monitor if one is connected and the display panel is closed. otherwise, it selects the internal display. System LCD Only Selects the internal LCD, even if an external monitor is connected. Boot This tab allows you to modify the boot settings. Boot Priority Options This option allows you to set the priority for booting the computer. Click the Up and Down buttons to adjust the priority. To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. Release the F12 key one second after the computer is power on. 2. Use the up and down cursor keys to select the boot device you want and press ENTER. If your computer does not load the Boot menu, please refer to the Troubleshooting section. If a Supervisor Password has been set, manual boot device selection functions may be restricted. The boot device selection methods described above will not change the boot priority settings that have been configured in TOSHIBA System Settings. In addition, if you press a key other than one of those listed, or if the selected device is not installed, the system will continue to boot according to the current and available settings in TOSHIBA System Settings. Boot speed This option allows you to select system boot-up speed. User's Manual 5-13