Toshiba SD-2050U Owners Manual - Page 18

Connections Connecting to Optional Equipment You can enjoy high quality dynamic sounds by connecting the DVD video player to optional audio equipment. For connection to your TV, see "Connecting to a TV" 16 17 . For details of output sound, see 33 . : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. Amplifier equipped with a Dolby Digital decoder VIDEO OUT VIDEO Y PB PR AUDIO OUT S R L BITSTREAM/ ANALOG PCM 75 Ω coaxial cable To digital audio input To BITSTREAM/ PCM AUDIO OUT Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved. • Use DVD video discs encoded via the Dolby Digital recording system. • Make the following setting. On-screen display Select: Page 35 "Audio Out Select" "Bitstream" 39 Recording system D 33 Connecting to an amplifier equipped with Dolby Pro Logic Surround Dolby Pro Logic Surround You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). With an amplifier equipped with Dolby Digital Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set • Make the following setting. the amplifier so you can enjoy Dolby Pro Logic Surround sound. On-screen display Select: Page With an amplifier not equipped with Dolby Digital Connect the equipment as follows. "Audio Out Select" "Analog 2ch" 35 39 Amplifier equipped with Dolby Pro Logic VIDEO OUT VIDEO Y PB PR AUDIO OUT S R L BITSTREAM/ ANALOG PCM Be sure to set "Audio Out Select" to "Analog 2ch" when you enjoy sounds of Dolby Pro Logic Surround Surround using this connection. * To audio input To ANALOG AUDIO OUT * Connect one or two rear speakers. Audio cable The output sound from the rear speakers will be monaural even if you connect two rear speakers. 18