Toshiba SD-2109 Service Manual - Page 38

SECTION 2 PART REPLACEMENT AND ADJUSTMENT PROCEDURES CAUTIONS BEFORE STARTING SERVICING Electronic parts arc susceptible to static electricity and may easily damaged, so do not forget to take a proper grounding treatment as required. Many screws are used inside the unit. To prevent missing, dropping, etc. of the screws, always use a magnetized screwdriver in servicing. Several kinds of screws are used and some of them need special cautions. That is, take care of the tapping screws securing molded parts and fine pitch screws used to secure metal parts. If they are used improperly, the screw holes will be easily damaged and the parts can not be fixed. 1. REPLACEMENT OF MECHANICAL PARTS 1-1. Cabinet Replacement 1-1-1. Top Cover 1. Remove five screws (1) and remove the top cover (2). Screw (1) Top cover (2) Screws (1) 1-1-2. Clamper Stay 1. Remove two screws (1). 2. Release two claws and remove the Clamper stay (2). Screws (1) Clamper stay (2) Clamper stay (2) Clamper stay (2) Screw (1) r Claw Claw o, Fig. 2-1-1 C") Spring Claws Fig. 2-1-2 2-1