Toshiba SD3300 Owners Manual - Page 7
Connections - progressive scan dvd player
View all Toshiba SD3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English Connecting to television IMPORTANT! - You only need to make one video connection from the following options, depending on the capabilities of your television. - Connect the DVD player directly to the television. Using Composite Video Jack(CVBS) Connections connect the DVD player' s Y, PB, PR jacks to the corresponding Component video input jacks (or labeled as Y, Pb, Pr) on the TV (cable not supplied). B Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD player to the corresponding AUDIO IN jacks on the TV (cable not supplied). C Proceed to page 11 for detailed Progressive Scan set up. Using a RF modulator A Use the composite video cable (yellow) to connect the DVD player' s VIDEO(CVBS) jack to the video input jack(or labeled as A/V in, Video In or Composite) on the TV(cable supplied). To hear the sound of this DVD player through your TV, use the audio cables(white/red)to connect AUDIO OUT(L/R)jacks of the DVD player to corresponding AUDIO IN jacks on the TV(cable supplied). Using Component Video Jacks(Y, PB, PR) IMPORTANT! -If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need an RF modulator in order to view the DVD playback on the TV. A Use the composite video cable (yellow) to connect the DVD player' s VIDEO (CVBS) jack to the video input jack on the RF modulator (cable supplied). To hear the sound of this DVD player through your TV, use the audio cables(white/red) to connect AUDIO OUT (L/R) jacks of the DVD player to the corresponding AUDIO IN jacks on the RF modulator (cable supplied). B Use the RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV jack on the RF modulator to the ANTENNA IN jack on the television. C Connect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN jack on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV.) IMPORTANT! -The progressive scan video quality is only possible when using Y, PB, PR and a progressive scan TV is required. A Use the component video cables (red/blue/green) to Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.