Toshiba SD3750 Owners Manual - Page 54
Audio Out Select, Dynamic Range Control, PCM Down Sampling, Function setup
View all Toshiba SD3750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Function setup AB C Audio PCM Down Sampling Off Audio Out Select Bitstream Dynamic Range Control On Karaoke Vocal Off PCM Down Sampling DVD-V Make this selection only when you use your audio equipment (e.g. receiver) connecting to the DVD player via the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack. According to performance of your connected receiver, select a sound processing option for playback of a disc that contains high frequency signals (sampling frequency 96 kHz). Off: Select when your connected receiver conforms to high frequency signals of 96 kHz. The DVD player outputs these signals in a disc as they are. On: Select when your connected receiver does not conform to high frequency signals of 96 kHz. The DVD player outputs these signals in a disc depressing the frequencies to 48 kHz. Notes • Regardless of this setting, the DVD player outputs high frequency signals in a copyright protected disc, depressing to 48 kHz. • If you select "Off" while your connected receiver does not conform to high frequency signals of 96 kHz, you cannot hear output sound of those signals. Audio Out Select DVD-V VCD CD Select the output sound format corresponding to your system connection. For details of sound recording systems, see 43 . Bitstream: Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder. 21 22 The DVD player outputs digital audio information in the bitstream format when you play a DVD video disc recorded on the Dolby Digital, DTS, MPEG1 or MPEG2 recording system. PCM: Select when connected to a 2 channel digital stereo amplifier. 23 The DVD player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2 recording system. Note When you make a connection to a TV, or Dolby Pro Logic or stereo system via the analog audio jacks, select "Bitstream" or "PCM." Dynamic Range Control DVD-V Off: Full dynamic range is maintained. On: Dynamic range is reduced. Notes • This function works only during playback of Dolby Digital recorded discs. • The level of Dynamic Range Reduction may differ depending on the DVD disc. 59