Toshiba Satellite P105-S6197 User Manual - Page 67
Using external display devices, Configuring virtual buttons
View all Toshiba Satellite P105-S6197 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Getting Started 67 Using external display devices Configuring virtual buttons The virtual buttons at the top of the Dual Mode Pad are preconfigured for the Email, ConfigFree, and Print functions. You can assign different functions to these buttons if you wish. The virtual buttons on the bottom of the Dual Mode Pad (buttons 4, 5, and 6 in the Properties for Synaptics LuxPad window) are unassigned by default. In order to use one of these buttons, you must first configure that button so that it is associated with a function. To configure a virtual button: 1 Perform steps 1-5 in "Enabling Dual Mode" on page 66. 2 Select the virtual button you wish to configure. 3 Select the desired options, and then click OK. 4 Click OK. 5 Click OK to close the Mouse Properties window. Using external display devices Your computer comes with a built-in display, but you can also connect an external display device to an available video port, as follows: ❖ An external monitor or projector via the RGB (monitor) port ❖ A TV, VCR, or DVD recorder via the S-video (TV-out) port ❖ A projector or a monitor via the DVI video port (available on certain models) NOTE DVI stands for Digital Visual Interface, and is a standard for connecting computers to digital monitors. Before connecting an external monitor or video projector, configure your computer for the type of device you are connecting. To do this, refer to the documentation for your operating system and devices. NOTE Coaxial cable connection to this computer must only be used if the cable's outer conductive shielding has been grounded by the cable installer at the building premises as close to the point of cable entrance, or attachment, as practicable and the connection complies with all local cable installation requirements that are applicable in your area.