Toshiba Satellite T135-SP2910C Satellite T130/T110 (PST3AU, PST1AU) User's Gui - Page 53
For this model, Slot A is the slot on the right-hand side of
View all Toshiba Satellite T135-SP2910C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Getting Started Adding memory (optional) 53 Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems. 9 Carefully remove the new memory module from its antistatic packaging, without touching its connector. 10 Locate an empty memory module slot on the underside of the computer. NOTE If no memory slot is available, you must remove a module by performing steps 2-3 of "Removing a memory module" on page 56. NOTE For this model, Slot A is the slot on the right-hand side of the memory compartment, when looking from the front of the computer. Slot B is the slot on the left-hand side. If only one memory module is to be installed, it must be installed in Slot A. 11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector's notch with the matching key in the socket. notch latch connector latch key (Sample Illustration) Aligning the memory module with the socket