Toshiba TDP-S8UC02 Owners Manual - Page 36

Lamp replacement (Continued) 1 Unplug power cord. 2 Wait until lamp is sufficiently cooled. Wait for at least 1 hour. 3 Remove the lamp cover. 3 Loosen the two screws, raise the outer lamp cover with your fingers as shown to remove the outer lamp cover. Use care to avoid any damage to nails and/or tip of your finger(s). If you have any difficulty in removal, you can use a screwdriver or any other smaller tool for your convenience. 4 Pull out the lamp. 4 Loosen the two lamp locking screws, pull up the handle to remove the lamp. Lamp cover 1 1 2 5 Mount the new lamp. 5 2 Align the orientation, press down the new lamp until the bottom is reached, and lock in place using the two lamp locking screws. 1 6 Replace the lamp cover. Align the cover,and press it in,then tighten the screws loosend in step 3 until the lamp cover is no longer loose. 36