Toshiba Tecra A2-S139 Maintenance Manual - Page 193
Auto-Selected, CardBus/16-bit, PCIC Compatible, Enabled, Disabled
View all Toshiba Tecra A2-S139 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
3.29 SETUP 3 Test and Diagnostics 10. Drives I/O This option displays the address and interrupt level for the hard disk drive, CD/DVD-ROM drive and PC card. It is for information only and cannot be changed. Built-in HDD CD-ROM PC Card The setting for the built-in HDD is displayed. The setting for the built-in CD-ROM is displayed. This is displayed, when a PC card type HDD that can boot system is inserted to PC card slot. 11. PCI Bus This option displays the interrupt level for the Card Bus in the computer. It is for information only and cannot be changed. PCI BUS = IRQ10, IRQ11 12. PC Card This option displays the PC Card Controller mode. Auto-Selected Use this setting for all PC Card if you are using Windows 98/2000/XP which support Plug&Play. (Default) CardBus/16-bit If you are using Windows for Workgroups or Windows NT 4 or lower or if the card does not work properly with the AutoSelected setting, use this setting for Card Bus PC card. PCIC Compatible If you are using Windows for Workgroups or Windows NT 4 or lower or if the card does not work properly with the AutoSelected and CardBus/16 bit setting. 13. Peripheral Use this option to select the peripheral's mode. (a) Internal Pointing Device This option enables or disables the touch pad Enabled Enables the touch pad. (Default) Disabled Disables the touch pad. 3-83 Satellite A50/TECRA A2 Maintenance Manual (960 -478)