Toshiba W525 Owners Manual - Page 22

STEREO RECORDING AND PLAYBACK RECORDING STEREO BROADCASTS The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. When an MTS STEREO broadcast is received, the STEREO STEREO will appear on the screen and the program can be viewed or recorded in stereo (refer to pages 18 and 19 for recording procedures). The Hi-Fi STEREO recording procedure is the same as for normal recordings. NOTE: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case the word "STEREO" will not appear and the sound will be in mono. OUTPUT SELECTION When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO videotape, press the AUDIO SELECT button to allow the audio to be heard through both speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time you press the button, the OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below. OUTPUT SOUND HEARD ON BOTH SELECTION SPEAKERS STEREO L CH R CH MONO STEREO LEFT CHANNEL AUDIO RIGHT CHANNEL AUDIO MONO SECOND AUDIO PROGRAM (SAP) Your VCR is fitted with an SAP broadcast system which enables you to switch to a SECOND AUDIO PROGRAM when viewing a selected channel. This function applies only when the program is broadcast in multi-languages through the SAP broadcast system. CHECK BEFORE YOU BEGIN • Turn ON the TV and set to the video channel 3 or 4. • Turn ON the VCR POWER button. • Press the TV/VCR selector button to select the VCR mode. When a TV is connected with an audio/video cable, turn the TV on and select the video input mode on the TV. 1 Press the MENU button. Press the TRACKING SET + or - button to select the SAP option. 2 Press the ENTER button to select the ON position. 3 Press the MENU button again. MENU CLOCK SET TIMER REC SET AUTO REPEAT ON OFF CH SET UP SAP ON OFF LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND ON OFF 〈+/-/ENTER/MENU〉 MENU CLOCK SET TIMER REC SET AUTO REPEAT ON OFF CH SET UP SAP ON OFF LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND ON OFF 〈+/-/ENTER/MENU〉 LISTENING TO SAP When the VCR is turned on or a channel selection is made, make certain "SAP" appears on the screen. This means that the "Second Audio Program" broadcasting is available. STEREO SAP SAP OR NOTES: • When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. • When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack, the sound will be monaural. 22