Tripp Lite 5P750 Eaton 5P UPS Installation and User Manual - Page 27

ENGLISH 6. Appendices 6.2 Glossary Backup time Time during which the load can be supplied by the UPS operating on battery power. Battery test Internal UPS test to check battery status. Cold start Deep discharge Load The devices connected to the UPS can be started even if AC input power is not available. The UPS operates on battery power alone. Battery discharge beyond the permissible limit, resulting in irreversible damage to the battery. Devices or equipment connected to the UPS output. Low-battery warning Normal AC input Percent load This is a battery-voltage level indicating that battery power is low and that the user must take action in light of the imminent break in the supply of power to the load. The AC-power line supplying the UPS under normal conditions. Ratio of the power effectively drawn by the load to the maximum output of the UPS. Personalisation Programmable outlets UPS It is possible to modify certain UPS parameters set in the factory. Certain UPS functions can also be modified by the software to better suit user needs. Controllable outlets for automatic load shedding, remote shutdown and sequential restart (personalised using software). Uninterruptible Power System. UPS ON/OFF controlled by software This function enables or disables initiation of UPS ON/OFF control sequences by computer power-management software. 620-00082-01-us (en) Page 27