Tripp Lite SU3000RTXL3UHV Owner's Manual for SmartOnline UPS 932609 - Page 5
Serial Port Connection, External Battery Pack Connection
View all Tripp Lite SU3000RTXL3UHV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
200608121 93-2609 SU Owner's Manual.qxd 10/3/2006 3:32 PM Page 5 Installation (continued) Optional Connections Your UPS will function properly without these connections. 1 Serial Port Connection Using the serial cable provided, connect a serial port on your computer to the serial port of your UPS. See Communications in the Basic Operation section of this manual to determine how to monitor and manage your UPS using this port. 2 External Battery Pack Connection Check to ensure that the external batteries you are connecting match the voltage listed on your UPS's battery connector. Plug either end of the battery connection cable (supplied with the battery pack) into the UPS's External Battery Connector and the other end into the Battery Output Connector on the rear panel of the external battery pack. Since your UPS has internal batteries, external batteries are only needed to extend runtime. Adding external batteries will increase recharge time as well as runtime. Make sure that each end of the cable is fully inserted into its connector. Several small sparks may result during battery connection; this is normal. 1 SU2200RTXL2U shown 48V/26A 2 SU2200RTXL2U shown 5