Uniden ANA9310 English Owners Manual - Page 15
Connecting the Telephone Cords
View all Uniden ANA9310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the Telephone Cords The ANA 9310 must be connected to an analog PBX port or a standard analog telephone line. CAUTION: n Never install telephone wiring during a lightning storm. n Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. n Use caution when installing or modifying telephone lines. You can also connect a standard 2500-type desk phone to the ANA 9310: Connect to the LINE OUT Jack 9
Connecting the Telephone Cords
The
ANA 9310
must be connected to an analog PBX port or a
standard analog telephone line.
CAUTION:
n
Never install telephone wiring during a lightning storm.
n
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
n
Use caution when installing or modifying telephone lines.
You can also connect a standard 2500-type desk phone to the
ANA 9310
:
9
Connect to the LINE OUT Jack