Uniden ANA9620 English Owners Manual

Uniden ANA9620 Manual

Get Uniden ANA9620 PDF manuals and user guides View all Uniden ANA9620 manuals
Add to My Manuals
Save this manual to your list of manuals

Uniden ANA9620 manual content summary:

  • Uniden ANA9620 | English Owners Manual - Page 1
    Telephone Cords 4 • Power To The Base & Charger Units 5 • Wall Installation 6 • Attaching The Belt Clip 9 • Installing The Battery 10 • Charging The Battery 10 • Charging Second Battery 11 • Low Battery Indicator 11 • Cleaning Battery & Charging Unit Contacts 12 Handset Use 13 • ANA9620
  • Uniden ANA9620 | English Owners Manual - Page 2
    Uniden ANA9620 Cordless Telephone. The ANA9620 is designed and engineered to exacting standards for reliability, long life, and outstanding performance. To get the most from your ANA9620, please read this Owner’s Manual thoroughly. To familiarize you with the features of your cordless phone, refer
  • Uniden ANA9620 | English Owners Manual - Page 3
    Manual • Precautions and Important Safety Instructions If your ANA9620 is not performing to your expectations, try the steps listed in the Troubleshooting Section of this Guide. If you are still unable to resolve the problem, contact your PBX Administrator or the Uniden Technical Support Department
  • Uniden ANA9620 | English Owners Manual - Page 4
    and Important Safety Instructions” brochure. Setting Up and Adjusting Your Phone SELECTING THE LOCATION Select a location for the ANA9620 to avoid excessive heat or humidity. The base of your ANA9620 can be placed on a desk or tabletop near a standard 120V AC outlet and telephone line jack. The
  • Uniden ANA9620 | English Owners Manual - Page 5
    to page 16. CONNECTING THE TELEPHONE CORDS The ANA9620 must be connected to a PSTN or an analog PBX port telephone line. CAUTION: • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the
  • Uniden ANA9620 | English Owners Manual - Page 6
    SETTING UP ! Use only the Uniden AC adapter AD9500 supplied with this base. The unique design of your ANA9620 allows you to place the handset in the charging unit with or without the belt clip attached. The charging unit also has the ability to charge a second battery with or without the handset
  • Uniden ANA9620 | English Owners Manual - Page 7
    only the Uniden AC adapter AD9500 supplied with this base. WALL INSTALLATION w Standard Wall Plate Mounting These phones are designed to stand. 4. Plug one end of the short telephone cord into the LINE(s) jack on the base. Then place the telephone cord(s) inside the molded channel(s) on the bottom
  • Uniden ANA9620 | English Owners Manual - Page 8
    apart. Allow about 3 16 of an inch between the wall and screw heads for mounting the phone. 2. Plug and secure the AC adapter cord by following steps 2 and 3 of the . Standard Wall Plate Mounting 3. Plug one end of the telephone line cord into the LINE(s) jack on the base. Then place the
  • Uniden ANA9620 | English Owners Manual - Page 9
    only the Uniden AC adapter into the wall. • Make sure the wall material is capable of supporting the weight of the charging unit. • Use #10 screws with anchoring 3 16 of an inch between the wall and screw heads for mounting the phone. 3/16" 1 1/2" 2. Plug the AC adapter into the charging unit
  • Uniden ANA9620 | English Owners Manual - Page 10
    SETTING UP ATTACHING THE BELT CLIP You can use the belt clip to attach the handset to your belt or pocket for convenient portability. 1. Snap the tab out of the belt clip notch on the top of the handset. 2. Slide the clip into the tab slot. 3. Press firmly until it snaps into place. 4. To remove,
  • Uniden ANA9620 | English Owners Manual - Page 11
    supplied with this phone. INSTALLING THE BATTERY 1. Remove the battery cover by pressing the latch and sliding the cover down and off of the handset. 2. Slide the battery down into the NOTCH handset. Note: The ANA9620 has a low battery protection system which allows the battery to be replaced
  • Uniden ANA9620 | English Owners Manual - Page 12
    in the CHARGE 2 slot, the CHARGE 2 LED lights briefly when you insert the battery. 4. You can replace the ANA9620 battery during a call. You have up to 20 seconds to replace the battery. LOW BATTERY INDICATOR When the handset battery is low and needs to be charged, you will see the batt low icon
  • Uniden ANA9620 | English Owners Manual - Page 13
    charging unit without first checking to ensure that it has been unplugged. CLEANING BATTERY & CHARGING UNIT CONTACTS To maintain a good charge, it is important to clean all charging contacts on the handset, second battery and charging unit about once a month. Use a pencil eraser or other contact
  • Uniden ANA9620 | English Owners Manual - Page 14
    HANDSET USE FOR YOUR NEW PHONE Handset Use Before using your ANA9620, be sure to raise the antenna to the vertical position. HANDSET USE Note: Operation of the ANA9620 is performed using the handset out of the charging unit. ANA9620 HANDSET CONTROLS talk chan vol Condition Action
  • Uniden ANA9620 | English Owners Manual - Page 15
    is at the range limit of the ANA9620, or no power is going to the base, you may see: NO SERVICE Take the following action: During a Call In Standby Mode Sound is Muted Condition Can’t make or answer calls (Phone may ring intermittently)
  • Uniden ANA9620 | English Owners Manual - Page 16
    L2. 5551212 talk When you hear a dial tone, enter the number you are calling. To hang up, press talk. REDIAL FUNCTION The ANA9620 stores up to the last three phone numbers you dialed. To redial these numbers: 1. Press FLASH/RDL The last number dialed appears in the display. To scroll through the
  • Uniden ANA9620 | English Owners Manual - Page 17
    Programming mode, you can select either Analog PBX or PSTN (Public Service Telephone Network) operation. The default is PSTN. Available features of each your selection into memory. The handset LCD displays: The phone returns to . Standby For operation in PSTN mode, see page 19. For operation in PBX mode
  • Uniden ANA9620 | English Owners Manual - Page 18
    for outside transfers only: Press and hold PAUSE for two seconds. The talk icon blinks Press FLASH/RDL. Press 9. Press XFER. Press XFER. For the ANA9620, the transfer key is operated by the Hook-Flash function. Program your system transfer code with the assistance of the PBX System Administrator
  • Uniden ANA9620 | English Owners Manual - Page 19
    “Hook Flash” : Press and hold PAUSE for two seconds. The talk icon blinks. Press FLASH/RDL. Press 9. Press CONF. Press CONF. For the ANA9620, the conference key is operated by the Hook-Flash function. Program your system conference code with the assistance of the PBX System Administrator. &
  • Uniden ANA9620 | English Owners Manual - Page 20
    PBX FEATURES NOTE The exact operation of the Feature Buttons depends on how your PBX system is configured. Contact your PBX Administrator for more information. USING THE FEATURE BUTTONS w Placing a Call “on Hold” Press HOLD. You will hear a “beep” and see: To resume the call, press L1 or L2 or
  • Uniden ANA9620 | English Owners Manual - Page 21
    PBX Features w L1 Key Press the L1 key to initiate a call on Line 1. w L2 Key Press the L2 key to initiate a call on Line 2. w CONF In PBX mode, the CONF key must first be programmed. Refer to the section entitled “PROGRAMMING CONF IN PBX.” w XFER Press XFER (TRANSFER), you will hear a “beep.” Dial
  • Uniden ANA9620 | English Owners Manual - Page 22
    ) during , Standby and handset earpiece audio level during a call. The same key also selects the item during programming mode. w chan KEY The ANA9620 automatically selects the clearest of three channels during a call for maximum audio quality. But, if you hear static or noise during a call, press
  • Uniden ANA9620 | English Owners Manual - Page 23
    PSTN Features w L1 Key Press the L1 key to initiate a call on Line 1. w L2 Key Press the L2 key to initiate a call on Line 2. w CONF To connect a second party to a call in progress: 1. Press HOLD, to place the current call on hold. 2. Press L2. 3. Dial the other person’s number. 4. When the other
  • Uniden ANA9620 | English Owners Manual - Page 24
    ) during , Standby and handset earpiece audio level during a call. The same key also selects the item during programming mode. w chan Key The ANA9620 automatically selects the clearest of three channels during a call for maximum audio quality. But, if you hear static or noise during a call, press
  • Uniden ANA9620 | English Owners Manual - Page 25
    ACCESSORIES FOR YOUR NEW PHONE Accessories OPTIONAL HEAD SET The optional headset (EXP9530) provides a “Hands-Free” Option for the ANA9620. With the headset call in case of AC power failure. The backup adapter contains a battery that provides enough power for you to complete the call and hang up
  • Uniden ANA9620 | English Owners Manual - Page 26
    contact your PBX Administrator. AC Adapter Part # AD9500 for the Base Charger and AC Adapter EXP9685 Backup Adapter EXP9505 500 mAh Battery BT-9000 Leather Case EXP9683 ACCESSORIES Head Set EXP9530 Telephone Cord BaseWall Mount EXP9660 Belt Clip EXP9602 Belt Clip EXP9603 • Operating
  • Uniden ANA9620 | English Owners Manual - Page 27
    FOR YOUR PHONE Troubleshooting If your ANA9620 Cordless Telephone is not performing to your expectations, try these steps. If you are still unable to resolve the problems, contact your PBX Administrator or the Uniden Technical Support Department. Note: Do not attempt to service this unit
  • Uniden ANA9620 | English Owners Manual - Page 28
    SPECIFICATIONS FOR YOUR PHONE SPECIFICATIONS Specifications GENERAL The ANA9620 complies with FCC parts 15 and 68, and IC :Rechargeable sealed lead acid battery Size :2 1/4 in. W x 1 1/2 in. D x 8 1/2 in. H with antenna Weight :Approx. 8.8 oz. with battery Battery :Capacity 500 mAH, 4.0V
  • Uniden ANA9620 | English Owners Manual - Page 29
    Covered under one or more of the following U.S. patents: 4,511,761, 4,523,058, 4,595,795, 4,597,104, 4,797,916, 4,803,491, 5,157,686, 5,253,268 and other patents pending UNYL3203000 ©1998 Uniden America Corporation. Printed in the China All rights reserved.
  • Uniden ANA9620 | English Owners Manual - Page 30
    HANDSET CONTROLS & FUNCTIONS 1. Ringer ON/OFF switch 2. Message Display 3. Talk(talk)Key 4. L2 Key 5. L1 Key 6. Hold (HOLD)Key 7. Pause (PAUSE) Key 8. Numeric Keypad 9. Microphone 10. Headset Jack 11. Channel(chan) Key 12. Volume (vol) Key 13. Conference (CONF) Key 14. Transfer (XFER) Key (PBX
  • Uniden ANA9620 | English Owners Manual - Page 31
    BASE CONTROLS & FUNCTIONS
  • Uniden ANA9620 | English Owners Manual - Page 32
    1998 Uniden America Corporation rights reserved q Printed in China q `
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32