Uniden ANA9620 English Owners Manual - Page 18
Pause, Flash/rdl
View all Uniden ANA9620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
PROGRAMMING XFER IN PBX Note: Before programming these commands, contact your PBX Administrator to obtain programming codes. The XFER key can be programmed for special use, such as causing a Hook Flash followed by a special number or function. The Hook Flash is used to send a signal to the PBX system to initiate a transfer. For example to program the XFER key for Hook Flash and the 9 key for outside transfers only: Press and hold PAUSE for two seconds. The talk icon blinks Press FLASH/RDL. Press 9. Press XFER. Press XFER. For the ANA9620, the transfer key is operated by the Hook-Flash function. Program your system transfer code with the assistance of the PBX System Administrator. % PROGRAMMING PBX
XFER
XFER
9
PAUSE
FLASH/RDL
9
XFER
XFER