Uniden BT108 English Owners Manual - Page 4

Charging the BT108 Charging the BT109 Connect the adapter to the power Connect either adapter to the power connector on the top of connector on the top of the headset, the headset. Connect the AC adapter to a standard 120 volt then plug it into a standard 120 volt AC (regular indoor) power outlet. Connect the DC adapter to AC (regular indoor) power outlet. a standard 12 volt DC (regular automobile) power outlet. Pair the headset to your Bluetooth phone Pairing is like "introducing" two Bluetooth devices and giving them permission to connect to each other. If you want to use the headset with more than one phone, you need to pair it with each phone separately. Once a phone and the headset are paired, they can connect automatically whenever they detect each other. 1. Make sure the headset is powered off and the power adapter is not connected (you can't use the headset while it's charging). . Press and hold Power until the LED flashes alternating red and blue. The headset is in pairing mode and should be visible to other Bluetooth devices.