Uniden CLX502 English Owners Manual - Page 71
Multi-Handset Features
View all Uniden CLX502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
note Multi-Handset Features The features in this section require a minimum of two handsets to operate. To add additional handsets to your system, see "Expanding Your Phone" on page 11. •If the party is out of range, No Signal appears in the display, and the operation will be canceled. •While a pair of handsets are in Intercom or DirectLink mode, they cannot be used to make or receive calls. Other handsets can still make and receive calls. Using DirectLink Mode In DirectLink Mode, a pair of handsets can function as two-way radios. DirectLink Mode does not interfere with the base's ability to make or receive telephone calls. You must set both handsets to DirectLink Mode to make a DirectLink call. To enter DirectLink mode, select Direct Link option from the main menu. And then press the ENTER soft key. Direct Link Mode complete. appears once the selection is confirmed. To make a DirectLink call, press the DirectLink soft key. Select &KTGEV.KPM the handset you want to call. To answer a DirectLink call, press talk/flash or if Any tone or # key. Press Key end Answer is when you on, press any want to hang number up. key, */ To exit DirectLink mode and be able to receive normal phone calls again, press the CANCEL soft key, and then press the OK soft key. 5'.'%6 Multi-Handset Features www.uniden.com Multi-Handset Features [ 7 0 ]