Uniden D2280 English Owners Manual - Page 21

Programming a Security Code With the phone in standby, open the menu; select Ans. Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you're finished.  Remember to make a note of your new security code! Dialing In to Your System 1. Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.) 2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby. 3. The system announces the time, the number of messages in memory, and a help prompt. It beeps to let you know it's waiting for a command. 4. When you hear beeping, enter a 2-digit command from the chart.  If you don't press any keys for 15 01 Repeat message 02 Play message 05 Stop playback 06 Turn the system on seconds, the 03 Skip message 09 Turn the system off system hangs 04 Delete message 10 Hear help prompts up and return to standby. Important Information Solving Problems If you have any trouble with your phone, check this section first. If you need help, call our Customer Care Line listed on the front cover. General problems Possible solutions No handsets can make or receive calls.  Check the telephone cord connection.  Disconnect the base AC adapter for a few minutes; then reconnect it. A handset can't make or receive calls.  Move the handset closer to the base. English - 21