Uniden DCT6465 English Owners Manual - Page 27

GETTING STARTED Setting the Dial Mode 1) Enter the Global Setup menu, and then the Dial Mode submenu (see "Entering the Menu" on page 20). 2) Press ring/vol/∧ or ring/vol/∨ to change the select, Tone or Pulse (the initial setting is Tone). 3) Press select/ . You will hear a confirmation tone. &KCN/QFG 6QPG 2WNUG •If you are not of your dialing system, set the unit to tone dialing. Make a trial call. If the call connects, leave the setting as is, otherwise set the unit to pulse dialing. •If your phone system requires pulse dialing and you need to send DTMF tones in certain situations during a call, you may Switch Over to tone dialing (refer to "Tone Dialing Switch-over" on page 32) Copy Phonebook 1) Enter the Global Setup menu, and then the Copy Phonebook submenu (see "Entering the Menu" on page 20). 2) Press ring/vol/∧ or ring/vol/∨ to choose One Memory or All Memory, and then press select/ . %QR[2JQPGDQQM 1PG/GOQT[ #NN/GOQT[ZZZ If you choose All Memory, go to step 4. 3) Press ring/vol/∧ or ring/vol/∨, or the number keypad (0-9) to select the phonebook location you want to export, and then press select/ . 4) Press ring/vol/∧ or ring/vol/∨ to select the handset to which you want transfer the phonebook locations, and then press select/ . If you choose All Memory in the step 2, Are you sure? appears. Press ring/vol/∧ or ring/vol/∨ to select Yes, and then press select/ . The phonebook locations will be transferred to the handset. On the receiving handset, Receiving and the handset name appear. When the transfer complete, Done! appears on the handset. note •If you receive a call or set up the Global Setup menu, the transfer will be canceled. •If an error occurs, the phonebook locations transferred before the error were stored in the receiving handset. Unavailable appears on the display. •When the memory of the receiving handset is full, Not enough memory in Receiving Handset appears. You cannot transfer the phonebook location. www.uniden.com GETTING STARTED [25]