Uniden DCX520 English Owners Manual - Page 5
Register the Handset, Using the DCX520 with the, Integrated Answering Device - charger
View all Uniden DCX520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3 Make sure the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the charger charging contacts. • Use only the supplied AD-310 AC adapter. Do not use any other AC adapter. • Place the charger close to the AC outlet so that you can unplug the AC adapter easily. Polarity of the plug Register the Handset YOU NEED TO REGISTER THE DCX520 BEFORE USE. 1 After placing the batteries in the handset and charging the batteries, remove the handset from the charger and place it in the main base. 2 Registration starts automatically. While registering, "Handset Registering" appears in the display. 3 When the registration is complete, "Registration Complete" appears in the display. If the registration fails, "Registration Failed" appears in the display. Try the steps above again. • An extra handset can be registered when the main base is in the standby mode. • In some cases you may need to attempt registration a few times. UInstienggrathteedDACnXsw52e0rinwgitDh etvhiece If the original unit has a built-in answering system, you can check your new messages, skip, repeat, or delete your messages with the DCX520 handset. For more instructions, see the owner's manual supplied with the original unit. -5-