Uniden DFR6 User Manual - Page 10
Troubleshooting, Specifications - radar detector
View all Uniden DFR6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
TROUBLESHOOTING IF... TRY THIS... The unit won't turn on Check the connections. Be sure they are all secure. No display or audio. xx If no display, check the connections. Be sure they are all secure. xx If no audio, check if Voice is turned off. The unit alarms when the vehicle hits bumps. Check the connections. Be sure they are all secure. The unit alarms briefly in the same location but There may be a motion sensor or house alarm in use no radar source was in view. within range. The DFR6 did not alert when a police car was in • The officer may not have radar/laser units turned on. view. • Check that the band is turned on. Press MENU and cycle through the options to get to the bands. If the band is turned off, the OLED will show OFF. Turn the band on. The vehicle starts but the DFR6 does not turn • Verify that the power cord is securely connected to on. the unit and inserted into the cigarette lighter jack. • Change the fuse in the power cord. Unscrew the cigarette lighter jack to access the fuse. SPECIFICATIONS Receiver Type: Antenna Type: Radar Double Conversion Superheterodyne Radar Self-Contained Antenna Laser Pulsed Laser Signal Receiver Frequency: X 10.525 GHz Laser Front Laser Back Dimensions K 24.150 GHz Ka 33.400 - 36.000 GHz Weight Operating Temp. Laser 800 nm - 1100 nm Storage Temp. Detector Type: Radar Scanning Frequency Discriminator Laser Pulse Width Discriminator Alarm Beep (Detected Band and Signal Type strength) Operating Power Source USB Interface Linear Polarized E-vector Vertical Convex Condenser Lens Concave Condenser Lens 110.00 mm (D) x 69.00 mm (W) x 29.50 mm (H) 6 oz (170g) -4° to +185° F (Radar/Laser) -20° to +85° C (Radar/Laser) -22° to +203° F (Radar/Laser) -30° to +95° C (Radar/Laser) DC 11.0 to 16.0 V USB Specification 2.0/1.1 - 10 -