Uniden EXA7950 English Owners Manual - Page 19

ANSWERING DEVICE SETUP TIP Adjust the volume of the system's announcements by pressing L or louder or M for softer on the base speaker. TURNING THE ANSWERING SYSTEM ON/OFF 1) To turn the answering system on, press answer on/off. A beep tone will sound and the current outgoing message will play on the base speaker. A second beep tone will sound after the outgoing message plays. The message counter LED lights to indicate that the unit is ready to answer calls. 2) To turn the answering system off, press answer on/off again. A beep tone will sound followed by the announcement "Answer off" and the message counter LED will go out. NOTE Press skip or repeat multiple times to scrol through days, hours, minutes, etc. SETTING THE CLOCK The clock on the EXA7950 Answering System starts when power is applied to the base. Follow these steps to set the clock to the correct time: 1) Press and hold clock until a beep tone sounds. clock NOTE If you make no entries within two minutes, the system returns to standby. 2) Next, press the skip or repeat key until the correct day is announced. (Numbers zero through six display on the base as each day is announced.) 3) Press clock again to select the day. The hour setting is announced. 17